Looking Beyond the GE Enbrighten Dual-Outlet Z-Wave Plug-In? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GE Enbrighten Dual-Outlet Z-Wave Plug-In Switch offers a practical solution for grouping two devices under one smart plug. If you are exploring ge enbrighten z wave plus smart alternatives, you might want different features. This unit requires a hub and lacks individual outlet control. You may need a dimmer, a sensor, or a switch for complex wiring. Some users prefer in-wall designs over plug-in models. Others need longer range connectivity for larger homes. The original product fits specific use cases but does not cover every scenario.
We selected these 6 alternatives because their specifications overlap with the original device. Each option shares the Z-Wave Plus connectivity standard, ensuring compatibility with your existing hub. The list includes models for different circuit types and load requirements. You will find options for fans, lights, and motion sensing. This guide helps you compare physical dimensions and smart home integrations. You can choose a device that matches your exact electrical needs. The following products are ranked by their practical utility and spec alignment.
How Each Alternative Compares
Zooz 800 Series Smart On/Off Switch
The Zooz 800 Series Smart On/Off Switch replaces the plug-in form factor with in-wall installation. It supports 3-way and 4-way wiring setups, which the GE unit cannot. This model requires a Z-Wave hub for operation. You gain flexibility for complex switch arrangements but lose the ability to plug devices directly into the wall. It fits homes needing simple on/off control without individual outlet management. Choose this if you are wiring new circuits or upgrading existing setups rather than adding temporary smart plugs.
Zooz ZEN54 0-10 V Z-Wave Dimmer
The Zooz ZEN54 0-10 V Z-Wave Dimmer targets commercial LED drivers instead of standard household outlets. It uses Z-Wave Long Range for better network coverage than the GE plug. This device requires a hub and in-wall installation. You get robust repeater capabilities and precise dimming for specific drivers. You give up the convenience of plugging in lamps or small appliances directly. It suits users managing professional lighting systems. Pick this alternative if your goal is automating commercial-grade fixtures rather than controlling general-purpose outlets.
Minoston 800 Series Z-Wave Dimmer Plug
The Minoston 800 Series Z-Wave Dimmer Plug offers dimming capabilities, which the GE Enbrighten lacks entirely. It plugs into the wall like the original but allows brightness adjustment. It supports Alexa, SmartThings, and Home Assistant, offering broader software compatibility. The unit is smaller and lighter than the GE model. You gain mesh network extension and dimming control. You lose the ability to control two devices simultaneously. This fits users prioritizing individual outlet dimming and wide hub support over grouping multiple devices on one plug.
Zooz Double Switch Fan and Light Dimmer
The Zooz Double Switch Fan and Light Dimmer installs in a single-gang box to control both fan and light. It replaces the plug-in nature of the GE unit with permanent wiring. It requires a Z-Wave hub and supports SmartThings and Home Assistant. You get 15A relay switching and LED dimming for combined fixtures. You lose the portability of a plug-in device. This alternative suits homeowners with existing fan and light boxes. Choose it if you need integrated control for ceiling fixtures rather than controlling portable lamps or appliances.
Enbrighten In-Wall Motion Sensor Smart Switch
The Enbrighten In-Wall Motion Sensor Smart Switch adds motion and light sensing to the basic on/off function. It installs in the wall instead of plugging into an outlet. It requires a Z-Wave hub and works with Alexa and SmartThings. You gain automated lighting control based on occupancy and ambient light. You lose the ability to plug in devices. This fits users wanting hands-free indoor lighting automation. Pick this if you need sensor-driven control rather than manual or scheduled control of plugged-in appliances.
Zooz Z-Wave Long Range On/Off Switch
The Zooz Z-Wave Long Range On/Off Switch provides heavy-duty power handling for motors and LEDs. It installs in-wall and supports 3-way wiring. It uses Z-Wave Long Range for improved reliability compared to the standard Z-Wave Plus in the GE plug. You get robust switching for commercial-grade loads. You lose the plug-in convenience and dual-outlet capacity. This suits users controlling heavy loads or needing extended range. Choose this alternative if your application involves motors or high-power fixtures requiring durable in-wall switching.
Quick picks
Our 7 picks
GE Enbrighten Dual-Outlet Z-Wave Plug-In Switch
Best for: controlling two devices with one plug
- Smart Home Compatibility
- Alexa, Google Assistant
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave Plus
- Wiring Requirement
- No wiring required
- Switch Function
- On/Off Switch
- Dimensions
- 1.4 × 2.3 × 3.95 inches
View on Amazon: GE Enbrighten Dual-Outlet Z-Wave Plug-In Switch
This GE Enbrighten unit gives you two Z-Wave Plus outlets in one plug. You control both together via a hub. It works with Alexa and Google Assistant. The design saves space and fits behind furniture. You get manual switches and remote app control. It supports whole-home Z-Wave networks. This plug suits you if you manage two devices at once.
Pros
- Z-Wave Plus connectivity for broad hub support
- Dual outlets controlled simultaneously
- Compatible with Alexa and Google Assistant
- Manual on/off switches on the device
Cons
- Outlets cannot be controlled individually
- Requires a separate Z-Wave hub
- No built-in energy monitoring
Good fit if
- You want to control two devices together
- You already use a Z-Wave hub
- You need manual override switches
Skip if
- You need to control each outlet separately
- You want to use it without a hub
- You require individual energy tracking
Verdict: GE Enbrighten Z-Wave Plus Dual Outlet is a practical choice for users who want to group two devices under one smart plug. It fits you if you value manual switches and broad Z-Wave compatibility over individual outlet control.
Zooz 800 Series Smart On/Off Switch
Best for: simple 3-way and 4-way wiring setups
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave, Z-Wave Long Range
- Wiring Requirement
- Neutral required
- Circuit Type
- 3-Way, 4-Way, 5-Way
- Switch Function
- On/Off Switch
This Zooz ZEN76 is a white on/off switch built for 3-way and 4-way setups. It uses Z-Wave Long Range and the S2 security protocol for faster communication and better range. The device requires a neutral wire and a Z-Wave hub. It fits in shallow boxes and supports instant status updates. You should choose this if you need reliable multi-location control without rewiring existing switches.
Pros
- Supports 3-way, 4-way, and 5-way circuit configurations
- Built-in range test tool for troubleshooting connectivity
- Shallow 1.16-inch depth fits crowded electrical boxes
- S2 authenticated security protocol for enhanced safety
- Replaceable paddles available in multiple colors
Cons
- Requires a Z-Wave hub for all functions
- Does not work directly with smart speakers
- Limited to on/off control without dimming
Good fit if
- You need to replace existing switches in a 3-way setup
- You want to avoid rewiring other boxes in the circuit
- You require a shallow switch for tight electrical boxes
Skip if
- You do not have a Z-Wave hub installed
- You need dimming functionality for your lights
- You want direct voice control without a hub
Verdict: Zooz 800LR S2 On/Off Switch is the right choice for homeowners who need a simple, hub-dependent on/off solution for complex 3-way or 4-way wiring without adding extra physical switches.
Zooz ZEN54 0-10 V Z-Wave Dimmer
Best for: 0-10 V LED driver automation
- Smart Home Compatibility
- Hubitat, Home Assistant, SmartThings
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave Plus, Z-Wave Long Range
- Switch Function
- 0-10 V Dimmer
- Dimensions
- 1.5 × 1.4 × 0.7 inches
This Zooz ZEN54 is a Z-Wave Plus dimmer designed specifically for 0-10 V LED drivers. It supports Z-Wave Long Range for extended mesh coverage and includes a built-in signal repeater for traditional setups. The unit features SmartStart pairing and S2 authentication for secure network integration. You need a compatible Z-Wave hub to operate it. It allows you to adjust minimum and maximum brightness levels for precise light control.
Pros
- Supports 0-10 V LED driver dimming
- Z-Wave Long Range ready for extended coverage
- Built-in signal repeater stabilizes mesh networks
- SmartStart and S2 authentication for secure pairing
- Adjustable minimum and maximum brightness settings
Cons
- Requires a separate Z-Wave hub to function
- Limited to 0-10 V drivers, not standard lighting
- Custom drivers needed for some platforms like SmartThings
Good fit if
- You control 0-10 V LED drivers
- You want Z-Wave Long Range support
- You need a mesh repeater in your network
Skip if
- You lack a Z-Wave hub
- You use standard line-voltage lighting
- You want plug-and-play without configuration
Verdict: Zooz ZEN54 0-10 V Dimmer fits users managing commercial-style LED drivers who need robust Z-Wave Long Range connectivity and network repeater capabilities.
Minoston 800 Series Z-Wave Dimmer Plug
Best for: Z-Wave dimming and mesh extension
- Smart Home Compatibility
- Alexa, Google Assistant, SmartThings
- Hub Requirement
- Z-Wave Hub Required
- Connectivity
- Z-Wave
- Wiring Requirement
- No wiring required
- Switch Function
- Dimmer
- Maximum Load
- 200W Incandescent, 100W CFL/LED
This Minoston dimmer plug uses Z-Wave 800 Series technology for faster communication and extended range up to 1300 feet with a compatible hub. It offers 1-100% dimming control for incandescent and LED bulbs. The compact design allows two units per outlet. It requires a Z-Wave hub for operation and supports voice commands via Alexa or Google Assistant. This is a practical option for users seeking reliable dimming with strong mesh networking capabilities.
Pros
- Z-Wave 800 Series with SmartStart pairing
- 1-100% dimming range for various bulb types
- Compact size fits two plugs per outlet
- Acts as a range extender up to 1300ft
- Compatible with Alexa and Google Assistant
Cons
- Requires a Z-Wave hub for operation
- Lower maximum load of 100W for dimmable LEDs
- Cannot connect directly to Echo Plus devices
Good fit if
- You need precise dimming control for lamps
- You want to extend your Z-Wave mesh network
- You have limited outlet space for multiple devices
Skip if
- You do not have a Z-Wave hub
- You require direct Wi-Fi connectivity
- You need to control non-dimmable lights
Verdict: Minoston 800 Series Z-Wave Dimmer Plug is a solid choice for users who need reliable dimming and mesh network extension. It fits best in homes with existing Z-Wave hubs where space and range are priorities.
Zooz Double Switch Fan and Light Dimmer
Best for: single-gang fan and light combo boxes
- Smart Home Compatibility
- Home Assistant, Hubitat, SmartThings
- Hub Requirement
- Hub Required
- Connectivity
- 800 Series Z-Wave Long Range
- Wiring Requirement
- NEUTRAL WIRE REQUIRED
- Circuit Type
- Virtual 3-way
- Switch Function
- Dimmer
This in-wall dual switch packs an independent dimmer and relay into a single gang. You get 800 Series Z-Wave Long Range connectivity to run up to 75 Watts of LEDs on the paddle and up to a 15A fan load on the lower button. It suits you if you need independent lighting and fan control without cutting an extra wall box opening.
Pros
- Controls two separate circuits from a single-gang switch box
- 800 Series Z-Wave Long Range support with mesh repeating
- 15A relay rating for ceiling or exhaust fan loads
- Shallow 1.1-inch housing depth with pigtail wiring
Cons
- Relay switch offers on and off operation without fan speed control
- Does not support direct 3-way wiring circuits
- Incompatible with Z-Wave alarm panels from Ring, Vivint, ADT, or Alarm.com
Good fit if
- You have a neutral wire and a single-gang box controlling both a fan and lights.
- You use an open Z-Wave hub such as Home Assistant, Hubitat, or Z-Box.
Skip if
- You require variable fan speed adjustments rather than basic on and off switching.
- You rely on a security platform hub like Ring, Vivint, or ADT Pulse.
Verdict: Zooz Z-Wave Long Range Double Switch gives smart home owners with combined fan and light boxes dual control without expanding the wall opening. It fits open-hub setups that need 15A relay switching and LED dimming on a single electrical gang.
Enbrighten In-Wall Motion Sensor Smart Switch
Best for: Indoor automated lighting with motion and light sensing
- Smart Home Compatibility
- Alexa, SmartThings, Wink
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave
- Wiring Requirement
- Neutral Required
- Circuit Type
- Single Pole, Multi-Switch
- Switch Function
- Motion Sensor, On/Off Switch
View on Amazon: Enbrighten In-Wall Motion Sensor Smart Switch
This Enbrighten Z-Wave Plus switch combines a motion sensor with an on/off toggle for indoor use. It requires a neutral wire and a Z-Wave hub to function. You can customize motion sensitivity, time-outs, and light-sensing triggers. It supports multi-switch setups with add-on units and acts as a range extender for your network. It fits well in rooms needing automated lighting control based on presence and ambient light.
Pros
- Offers occupancy, vacancy, and manual operation modes
- Includes light-sensing option for low-light activation
- Features 5 time-out durations and 3 sensitivity levels
- Acts as a Z-Wave range extender up to 150ft
- Supports multi-switch setups with add-on switches
Cons
- Requires a neutral wire for installation
- Requires a Z-Wave hub to operate
- Limited to indoor environments only
Good fit if
- You need automatic lighting based on motion and light levels
- You want to extend your Z-Wave network range
- You have a neutral wire available in the switch box
Skip if
- You do not have a Z-Wave hub
- You are installing in an outdoor location
- Your switch box lacks a neutral wire
Verdict: Enbrighten Indoor Z-Wave Motion Sensor Switch provides customizable motion detection and network extension for indoor spaces. It suits users who need precise control over lighting automation and have the required hub and wiring.
Zooz Z-Wave Long Range On/Off Switch
Best for: Heavy duty motor and LED control
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave Long Range
- Wiring Requirement
- Neutral Required
- Circuit Type
- 3-Way, Single Pole
- Switch Function
- On/Off Switch
- Maximum Load
- 600W LED, 1HP
This Zooz wall switch uses Z-Wave Long Range for extended coverage. It handles up to 600 watts of LED load or 1 HP motors. The direct 3-way design works with standard switches if you have a neutral wire. It supports 240 V commercial use and includes S2 security. You get instant status reporting and scene control. It fits standard boxes.
Pros
- Z-Wave Long Range connectivity for better signal reach
- Handles 600W LED and 1HP motor loads
- Direct 3-way wiring without add-on switches
- S2 authenticated security and SmartStart pairing
Cons
- Requires a Z-Wave hub for operation
- Neutral wire is mandatory for installation
- Wall plate is not included in the box
Good fit if
- You need to control high-power motors or large LED arrays
- You have existing 3-way switch setups with neutral wires
- You want reliable S2 security for your home automation
Skip if
- You do not have a Z-Wave hub available
- Your switch boxes lack a neutral wire
- You prefer a plug-in outlet instead of a wall switch
Verdict: The Zooz ZEN75 800LR Heavy Duty Switch suits users who need robust power handling and long-range Z-Wave reliability. It is ideal for commercial-grade lighting or motor control in standard residential wiring.
Specifications side by side
| Spec | GE Enbrighten Dual-Outlet Z-Wave Plug-In Switch | Zooz 800 Series Smart On/Off Switch | Zooz ZEN54 0-10 V Z-Wave Dimmer | Minoston 800 Series Z-Wave Dimmer Plug | Zooz Double Switch Fan and Light Dimmer | Enbrighten In-Wall Motion Sensor Smart Switch | Zooz Z-Wave Long Range On/Off Switch |
|---|---|---|---|---|---|---|---|
| Smart Home Compatibility | Alexa, Google Assistant | not specified | Hubitat, Home Assistant, SmartThings | Alexa, Google Assistant, SmartThings | Home Assistant, Hubitat, SmartThings | Alexa, SmartThings, Wink | not specified |
| Hub Requirement | Hub Required | Hub Required | Hub Required | Z-Wave Hub Required | Hub Required | Hub Required | Hub Required |
| Connectivity | Z-Wave Plus | Z-Wave, Z-Wave Long Range | Z-Wave Plus, Z-Wave Long Range | Z-Wave | 800 Series Z-Wave Long Range | Z-Wave | Z-Wave Long Range |
| Wiring Requirement | No wiring required | Neutral required | not specified | No wiring required | NEUTRAL WIRE REQUIRED | Neutral Required | Neutral Required |
| Circuit Type | not specified | 3-Way, 4-Way, 5-Way | not specified | not specified | Virtual 3-way | Single Pole, Multi-Switch | 3-Way, Single Pole |
| Switch Function | On/Off Switch | On/Off Switch | 0-10 V Dimmer | Dimmer | Dimmer | Motion Sensor, On/Off Switch | On/Off Switch |
| Maximum Load | not specified | not specified | not specified | 200W Incandescent, 100W CFL/LED | 75W LED, 15A | not specified | 600W LED, 1HP |
| Operating Environment | not specified | not specified | not specified | not specified | not specified | Indoor | not specified |
| Dimensions | 1.4 × 2.3 × 3.95 inches | not specified | 1.5 × 1.4 × 0.7 inches | 2.52 × 1.18 × 1.46 inches | not specified | 1.5 × 1.5 × 3 inches | 4.1 × 1.75 × 1.3 inches |
| Weight | 11.2 ounces | not specified | not specified | 2.08 ounces | not specified | 6.4 ounces | not specified |
| Size | 1 Pack | not specified | not specified | 1Pack | 1.7" x 4.1" x 1.1" | 1 Pack | not specified |
| Color | White | White | not specified | White | White | White & Light Almond | White |
| Model | 55249 | ZEN76 800LR | ZEN54 | MP31ZD | ZEN30 800LR | 26931 | ZEN75 800LR |
Frequently asked questions
Do all these alternatives require a Z-Wave hub?
Yes, every listed device requires a Z-Wave hub to function. The GE Enbrighten Dual-Outlet, Zooz 800 Series, Minoston Dimmer Plug, and others all list Hub Required in their attributes. You cannot connect these switches directly to your phone or router. A compatible Z-Wave controller is necessary for automation and remote control.
Can I use these switches with Alexa or SmartThings?
Compatibility varies by model. The GE Enbrighten, Minoston 800 Series, and Enbrighten Motion Sensor Switch support Alexa. The Zooz Double Switch and Minoston plug work with SmartThings and Home Assistant. Always check the Smart Home Compatibility field for your specific platform before purchasing to ensure your hub can recognize the device.
Which option is best for controlling a ceiling fan and light?
The Zooz Double Switch Fan and Light Dimmer is designed for this task. It fits single-gang boxes, saving space compared to separate switches. It provides dual control for combined fan and light fixtures. This model supports 15A relay switching and LED dimming, making it suitable for standard residential fan and light combos.
Are there in-wall options for 3-way wiring setups?
Yes, several models support complex wiring. The Zooz 800 Series Smart On/Off Switch handles 3-way and 4-way setups. The Zooz Z-Wave Long Range On/Off Switch also supports 3-way circuits. These devices allow you to control lights from multiple locations without adding extra physical switches, replacing the need for traditional 3-way configurations.
Which device extends the Z-Wave mesh network range?
Several devices act as network repeaters to boost signal strength. The Minoston 800 Series Z-Wave Dimmer Plug extends mesh range. The Zooz ZEN54 0-10 V Dimmer also offers network repeater capabilities. Adding these to your setup can improve reliability for devices located farther from your main hub, ensuring stable communication across your home.
Is there a smart plug that dims lights instead of just turning them on and off?
Yes, the Minoston 800 Series Z-Wave Dimmer Plug provides dimming functionality. Unlike standard on/off plugs, this unit allows you to adjust brightness levels. It plugs directly into a standard wall outlet, offering a plug-in solution for dimming applications while still extending your Z-Wave mesh network for other devices.
What is the best choice for commercial-style LED drivers?
The Zooz ZEN54 0-10 V Z-Wave Dimmer is built for this purpose. It automates 0-10 V LED drivers commonly found in commercial settings. This device offers robust Z-Wave Long Range connectivity. It is ideal for users managing high-end lighting systems that require precise voltage control and reliable network performance.