6 Best Alternatives to the GE Enbrighten Add On Switch (2026)

How each alternative compares

Kasa Outdoor Smart Dimmer Plug

The Kasa Outdoor Smart Dimmer Plug uses Wi-Fi instead of Zigbee, so you do not need a hub. It is built for outdoor string lights, not in-wall switch replacements. The unit measures 3.13 by 1.53 by 2.76 inches and weighs 5.92 ounces. You get direct 2.4GHz network access without extra hardware. However, it lacks the multi-location mirroring of the GE add-on switch. It is a plug-in device for outdoor use. Pick this if you need weather-proof dimming for patio lights without a central controller. It offers simple on-off and dimming control via Alexa or SmartThings. The form factor is a plug, not a wall plate.

SONOFF Zigbee Mini Smart Switch 2-Pack

The SONOFF Zigbee Mini Switch is significantly smaller than the GE model, measuring 0.66 by 1.3 by 1.56 inches. It comes in a 2-pack for a lower entry point. You still need a Zigbee hub and neutral wiring for installation. This unit is designed to fit into tight electrical boxes where the bulkier GE switch might not. It supports Alexa, Google Home, and SmartThings. You lose the specific QuickFit housing design and the dual-voltage support of the GE unit. Choose this alternative if space is your primary constraint and you need multiple devices. It provides reliable Zigbee connectivity for basic smart switch expansion in cramped junction boxes.

SONOFF No-Neutral Zigbee Switch

The SONOFF No-Neutral Zigbee Switch operates without a neutral wire, which the GE model requires. This allows installation in older boxes lacking neutral connections. It measures 1.55 by 1.25 by 0.72 inches, making it compact. You need a Zigbee hub and compatible voice assistants like Alexa or Google Home. The GE switch supports both 120VAC and 277VAC for commercial use, while this SONOFF model is for residential loads. You give up the ability to use it in light-commercial settings. Pick this if your existing wiring lacks a neutral wire. It is a practical solution for tight spaces where standard wiring is not available. The hub requirement remains the same as the GE model.

CMARS Zigbee Mini Smart Plug 2-Pack

The CMARS Zigbee Mini Smart Plug is a hub-dependent device that offers network stability over plug-and-play convenience. It measures 1.8 by 1.8 by 1.1 inches and weighs 3.53 ounces. You need an existing Zigbee hub and support for Alexa, Google Home, or SmartThings. Unlike the GE add-on switch, this is a mini smart plug, not an in-wall switch replacement. It fits in tight spaces but does not mirror primary device functions in multi-switch setups. You lose the specific in-wall mounting and multi-location control features. Choose this if you already have a Zigbee ecosystem and need compact, stable control for specific outlets. It is a niche solution for hub owners prioritizing stability over versatility.

NOUS Zigbee Smart Plug with Energy Monitoring

The NOUS Zigbee Smart Plug includes energy monitoring, a feature absent in the GE Enbrighten add-on switch. It measures 2.17 by 2.2 by 1.97 inches and requires a Zigbee hub. You get detailed power usage data for appliances, along with support for Home Assistant, SmartThings, Alexa, and Google Home. This is a plug-in device, not an in-wall switch. You lose the multi-location mirroring and in-wall mounting capabilities. Pick this if you want to track energy consumption for specific devices. It is ideal for Home Assistant users who need granular data. The form factor is a plug, offering flexibility for portable appliances rather than fixed lighting circuits.

EzloPlus Smart Home Hub

The EzloPlus Smart Home Hub is a central bridge for mixed-protocol homes, not a switch replacement. It measures 4.13 by 4.13 by 1.37 inches. You use it to centralize control over Zigbee and other devices. Unlike the GE add-on switch, it does not control lights directly from a wall plate. You gain a unified interface for your entire smart home ecosystem. You lose the specific multi-location switch functionality and in-wall mounting. Choose this if you need a hub to manage diverse devices. It is a foundational component for complex setups. The hub supports Alexa integration and handles Zigbee connections. It is a infrastructure device, not a user-facing switch alternative.

Quick picks

Our 7 picks

1 Best overall

GE Enbrighten Add-On Switch QuickFit

Best for: Expanding control for existing GE smart switches

Smart Home Compatibility

Alexa, Google Assistant, SmartThings

Wiring Requirement

Neutral Required

Circuit Type

3-Way, Multi-Location

Switch Function

Add-On Switch

Connectivity

Zigbee

Application

Lights

View on Amazon: GE Enbrighten Add-On Switch QuickFit

This add-on switch mirrors functions of a primary GE smart control in multi-switch setups. It requires a neutral wire and connects via Zigbee. The housing depth is reduced by 20% for tight boxes. It supports 120VAC and 277VAC systems. You use it to control lights or fans from multiple locations alongside a main smart device.

Pros

• Reduces housing depth by 20% compared to previous models
• Supports both 120VAC and 277VAC for commercial use
• Dual ground ports allow daisy-chaining in multi-switch setups
• Compatible with Alexa and SmartThings via Zigbee

Cons

• Cannot operate as a standalone switch
• Requires a neutral wire for installation
• Wall plate is not included

Good fit if

• You need to add a control location to an existing GE smart switch
• You have limited space in older-style switch boxes
• You are installing in a light-commercial 277VAC system

Skip if

• You want a standalone smart switch without a primary device
• Your switch box lacks a neutral wire
• You need a wall plate included with the purchase

Verdict: GE Enbrighten Add-On Switch 47186 fits users who need to expand control of an existing GE smart switch to multiple locations. It is a practical solution for tight spaces and dual-voltage environments.

2 Best wi-fi

Kasa Outdoor Smart Dimmer Plug

Best for: outdoor string light dimming without a hub

Smart Home Compatibility

Alexa, Google Assistant, SmartThings

Hub Requirement

No Hub Required

Connectivity

2.4GHz Wi-Fi

Switch Function

Dimmer

Maximum Load

300W Incandescent, 150W LED/CFL

Application

Lights

View on Amazon: Kasa Outdoor Smart Dimmer Plug

This is a weather-resistant smart dimmer plug designed for outdoor string lights. It connects via 2.4GHz Wi-Fi without needing a hub. The unit supports voice control with Alexa and Google Assistant. You can adjust brightness remotely or use schedules for automation. It holds up to 300W for incandescent bulbs or 150W for LED/CFL. The IP64 rating protects against dust and water splashes.

Pros

• IP64 weather-resistant rating for outdoor use
• No hub required for 2.4GHz Wi-Fi connection
• Compatible with Alexa, Google Assistant, and SmartThings
• Groups multiple dimmers for synchronized control

Cons

• Limited to 2.4GHz Wi-Fi networks only
• Maximum load is 150W for LED/C bulbs
• Requires dimmable lights to adjust brightness

Good fit if

• You need to dim outdoor string lights remotely
• You want to avoid buying a separate smart hub
• You use Alexa or Google Assistant for voice control

Skip if

• You only have 5GHz Wi-Fi available
• You need to control non-dimmable lights
• You require a neutral wire for installation

Verdict: Kasa Smart Outdoor Dimmer Plug KP405 is a practical solution for managing outdoor lighting without extra hardware. It fits users who want simple, weather-proof dimming for string lights on 2.4GHz networks.

3 Best budget

SONOFF Zigbee Mini Smart Switch 2-Pack

Best for: expanding Zigbee device capacity in tight spaces

Smart Home Compatibility

Alexa, Google Home, SmartThings

Hub Requirement

Zigbee 3.0 Gateway Hub Required

Connectivity

Zigbee 3.0

Wiring Requirement

Neutral Required

Maximum Load

10A

Dimensions

0.66 × 1.3 × 1.56 inches

View on Amazon: SONOFF Zigbee Mini Smart Switch 2-Pack

The SONOFF ZBMINIR2 is a compact Zigbee 3.0 smart switch designed for in-wall installation. It requires a neutral wire and a compatible hub to operate. The device supports up to 64 connected devices and works with Alexa, Google Home, and SmartThings. Its small form factor fits standard mounting boxes. It offers reliable relay switching rated for over 100,000 cycles. This unit is ideal for expanding your smart home network.

Pros

• Supports up to 64 Zigbee devices for network expansion
• Compact dimensions of 1.3 by 1.56 inches fit standard boxes
• Relay rated for over 100,000 switching cycles
• Compatible with Alexa, Google Home, and SmartThings

Cons

• Requires a neutral wire for installation
• Needs a separate Zigbee 3.0 gateway hub
• Limited to 10A maximum load capacity

Good fit if

• You need to expand your Zigbee network capacity
• You have standard electrical boxes with limited space
• You already use a compatible smart home hub

Skip if

• Your electrical box lacks a neutral wire
• You want a switch that works without a hub
• You need to control high-power appliances over 10A

Verdict: The SONOFF ZBMINIR2 Zigbee Mini Switch is a space-saving solution for users with existing Zigbee hubs who need to add more devices. It fits well in tight electrical boxes but requires neutral wiring and a gateway to function.

4 Best premium

SONOFF No-Neutral Zigbee Switch

Best for: tight spaces without neutral wires

Smart Home Compatibility

Alexa, Google Home, SmartThings

Hub Requirement

Hub Required

Connectivity

Zigbee 3.0

Wiring Requirement

No Neutral Required

Circuit Type

2-Way

Dimensions

1.55 × 1.25 × 0.72 inches

View on Amazon: SONOFF No-Neutral Zigbee Switch

The SONOFF ZBMINIL2 is a compact Zigbee 3.0 smart switch designed for tight spaces. It requires no neutral wire, fitting into standard 86 or 120 type mounting boxes. You need a Zigbee hub to connect it to your smart home. It supports two-way control and works with Alexa, Google Home, and SmartThings. This switch handles loads as low as 3W without flickering. It is ideal for upgrading older wiring setups.

Pros

• No neutral wire required for installation
• Compact size fits 86 and 120 type boxes
• Supports loads as low as 3W without flickering
• Compatible with Alexa, Google Home, and SmartThings

Cons

• Requires a separate Zigbee hub to function
• Limited to on/off switching without dimming
• No external physical switch included

Good fit if

• You have no neutral wire in your wall box
• You need a switch for a tight mounting space
• You already use a Zigbee hub for other devices

Skip if

• You want to control lights without a hub
• You need dimming functionality for your lights
• You prefer a switch with a built-in display

Verdict: SONOFF ZBMINIL2 Zigbee Switch is a practical solution for tight spaces without neutral wires. It fits buyers who already have a Zigbee hub and need reliable on/off control for low-wattage loads.

5 Also great

CMARS Zigbee Mini Smart Plug 2-Pack

Best for: existing ZigBee hub owners

Smart Home Compatibility

Alexa, Google Home, SmartThings

Hub Requirement

Hub Required

Connectivity

Zigbee

Dimensions

1.8 × 1.8 × 1.1 inches

Weight

3.53 ounces

View on Amazon: CMARS Zigbee Mini Smart Plug 2-Pack

The CMARS Makida is a compact ZigBee smart plug designed for stability on crowded Wi-Fi networks. It requires a compatible hub, such as SmartThings or an Echo device, to function. The unit measures 1.8 by 1.1 by 1.8 inches and weighs 3.53 ounces. It supports voice control via Alexa and Google Home. This plug uses fireproof PC material for safety. It suits users who want reliable automation without adding more Wi-Fi devices to their network.

Pros

• ZigBee connectivity reduces Wi-Fi congestion
• Compact 1.8-inch width fits tight spaces
• Compatible with Alexa, Google Home, and SmartThings
• Fireproof PC material construction

Cons

• Requires a separate ZigBee hub to operate
• Incompatible with first-generation SmartThings
• Incompatible with Tuya and Sonoff hubs

Good fit if

• You already own a compatible ZigBee hub
• You want to avoid adding more Wi-Fi devices
• You need a compact plug for tight outlets

Skip if

• You do not have a ZigBee hub
• You use a first-generation SmartThings hub
• You prefer direct Wi-Fi connection without a hub

Verdict: The CMARS ZigBee Mini Smart Plug offers a stable, hub-dependent solution for users with existing smart home ecosystems. It is best for those prioritizing network stability over plug-and-play convenience.

6 Best home assistant

NOUS Zigbee Smart Plug with Energy Monitoring

Best for: Energy monitoring with Home Assistant

Smart Home Compatibility

Alexa, Google Home, SmartThings

Hub Requirement

Hub Required

Connectivity

Zigbee 3.0

Maximum Load

15A (1500W)

Dimensions

2.17 × 2.2 × 1.97 inches

View on Amazon: NOUS Zigbee Smart Plug with Energy Monitoring

The NOUS A9Z is a white Zigbee 3.0 smart plug designed for standard wall sockets. It requires a Zigbee hub to function, supporting integration with Home Assistant, SmartThings, Alexa, and Google Home. The unit measures 2.2 by 1.97 by 2.17 inches and handles a maximum load of 15 amps. It includes built-in energy monitoring to track real-time power consumption. This plug suits users who need remote control and scheduling for home appliances.

Pros

• Zigbee 3.0 connectivity for hub-based automation
• Built-in energy monitoring for power tracking
• Compatible with Home Assistant and SmartThings
• 15A maximum load capacity for appliances
• Compact design fits standard wall sockets

Cons

• Requires a separate Zigbee hub to operate
• IP20 rating limits use to indoor environments only
• No native Wi-Fi connectivity for direct app control

Good fit if

• You use a Zigbee hub like Home Assistant
• You need to monitor energy usage per device
• You want to automate appliances with voice commands

Skip if

• You do not have a compatible Zigbee hub
• You need outdoor weatherproofing for the plug
• You prefer direct Wi-Fi connection without a hub

Verdict: The NOUS Zigbee Smart Plug A9Z fits users who already have a Zigbee hub and want detailed energy monitoring for their appliances. It offers reliable integration with Home Assistant and SmartThings for automated control.

7 Also great

EzloPlus Smart Home Hub

Best for: Mixed-protocol smart home centralization

Smart Home Compatibility

Amazon Alexa, Google Assistant

Connectivity

Zigbee, Z-Wave, RF, Wi-Fi, Ethernet

Application

Lights

Dimensions

4.13 × 4.13 × 1.37 inches

View on Amazon: EzloPlus Smart Home Hub

The EzloPlus hub unifies Z-Wave, Zigbee, and RF devices under one MiOS interface. It connects to your router via Ethernet and supports Wi-Fi devices through Alexa or Google Assistant. This black unit measures 4.13 by 1.37 inches. It suits users who want to mix brands and control lights, locks, and sensors from a single app.

Pros

• Supports Z-Wave, Zigbee, and RF protocols
• Integrates with Amazon Alexa and Google Assistant
• Centralized control via MiOS operating system
• Ethernet connection for stable network link

Cons

• Requires a separate hub for Zigbee or Z-Wave devices
• No built-in Wi-Fi radio for direct device pairing
• Lacks a physical display for local status checks

Good fit if

• You own mixed-brand Z-Wave and Zigbee devices
• You want a single app for all smart home gear
• You prefer wired Ethernet over wireless hub connections

Skip if

• You need a plug-and-play solution without a hub
• You only use Wi-Fi devices without voice assistants
• You require a compact wall-mounted form factor

Verdict: EzloPlus Smart Home Hub is a versatile bridge for multi-protocol homes. It fits buyers who value centralized control over a single, unified smart home interface.

Specifications side by side

Frequently asked questions