ZOOZ Smart Switches: 7 Picks Ranked by Specs

Quick picks

Our 7 picks

1 Best overall

Zooz 800 Series Smart On/Off Switch

Best for: Multi-way lighting circuits with shallow boxes

Hub Requirement

Hub Required

Connectivity

Z-Wave, Z-Wave Long Range

Wiring Requirement

Neutral required

Circuit Type

3-Way, 4-Way, 5-Way

Switch Function

On/Off Switch

View on Amazon: Zooz 800 Series Smart On/Off Switch

This Z-Wave Long Range on/off switch handles 3-way, 4-way, and 5-way circuits without extra hardware. It uses the 800LR protocol for faster communication and includes a built-in range test tool. The unit is only 1.16 inches deep, fitting into shallow electrical boxes. You need a Z-Wave hub for remote control and voice commands. It requires a neutral wire for installation.

Pros

• Supports 3-way, 4-way, and 5-way setups without add-on switches
• 800LR Z-Wave Long Range connectivity for extended mesh range
• Compact 1.16-inch depth fits in shallow or crowded electrical boxes
• Built-in range test tool for troubleshooting connectivity issues

Cons

• Requires a Z-Wave hub; no direct smart speaker control
• On/off function only; does not support dimming
• Neutral wire required for installation

Good fit if

• You are upgrading a multi-way lighting circuit without rewiring
• You need a slim device for shallow electrical boxes
• You want Z-Wave Long Range reliability in your mesh

Skip if

• You need dimming capabilities for your lights
• Your electrical box lacks a neutral wire
• You want direct voice control without a hub

Verdict: Zooz ZEN76 800LR On/Off Switch is ideal for homeowners with multi-way circuits who need a slim, hub-dependent switch with extended range. It simplifies complex wiring while providing reliable Z-Wave Long Range performance.

2 Best budget

Zooz 700 Series Z-Wave In-Wall Smart Relay

Best for: retrofitting existing mechanical switches with smart control

Smart Home Compatibility

SmartThings, Hubitat, Home Assistant

Hub Requirement

Hub Required

Connectivity

Z-Wave, Z-Wave Long Range

Wiring Requirement

Neutral Required

Circuit Type

3-Way

Switch Function

On/Off Switch

View on Amazon: Zooz 700 Series Z-Wave In-Wall Smart Relay

The Zooz ZEN51 is a compact smart relay that installs behind your existing wall switch. It adds Z-Wave Long Range and SmartStart control without replacing your current hardware. The unit measures 1.5 by 1.4 by 0.7 inches, fitting into tight electrical boxes. It requires a neutral wire and a compatible Z-Wave hub to function. This device supports 3-way setups and smart bulb modes for reliable automation.

Pros

• Supports Z-Wave Long Range and S2 authenticated security
• Compact 1.5 by 1.4 by 0.7 inch size fits crowded boxes
• Enables 3-way switch configurations for flexible wiring
• Smart bulb mode maintains switch functionality with smart lighting
• Includes 5-year warranty with US-based support

Cons

• Requires a neutral wire for installation
• Needs a compatible Z-Wave hub to operate
• Only works with mechanical or momentary switches, not dimmers

Good fit if

• You want to keep your existing wall switch style and color
• You have a neutral wire available in your switch box
• You need a compact relay for tight electrical enclosures

Skip if

• You do not have a neutral wire in your switch box
• You plan to use dimmer or electronic smart switches
• You prefer a standalone switch without a separate hub

Verdict: Zooz ZEN51 Z-Wave Smart Relay is a practical solution for retrofitting older switches with modern Z-Wave Long Range automation while maintaining your preferred wall control aesthetic.

3 Also great

Zooz Double Switch Fan and Light Dimmer

Best for: single-gang fan and light setups

Smart Home Compatibility

Home Assistant, Hubitat, SmartThings

Hub Requirement

Hub Required

Connectivity

800 Series Z-Wave Long Range

Wiring Requirement

NEUTRAL WIRE REQUIRED

Circuit Type

Virtual 3-way

Switch Function

Dimmer

View on Amazon: Zooz Double Switch Fan and Light Dimmer

This in-wall dual control fits standard boxes with a 1.1-inch depth. You get an independent paddle dimmer rated for 75 watts of LED lighting alongside a 15-amp relay button for exhaust or ceiling fans. It runs on 800 Series Z-Wave Long Range. It suits you if you want fan and light control inside a single-gang space.

Pros

• Independent dual-load control in a 1.1-inch deep profile
• 800 Series Z-Wave Long Range hardware
• 15A relay capacity for fans or general loads
• Up to 5-year warranty upon product registration

Cons

• No fan speed adjustment on the 15A relay
• Dimmer load capped at 75W for LEDs
• Incompatible with Ring, Vivint, ADT Pulse, and Alarm.com

Good fit if

• You need independent fan and light controls inside a single-gang wall box.
• You run an open Z-Wave platform like Home Assistant, Hubitat, or SmartThings.
• You have neutral wiring available in the switch box.

Skip if

• You require multi-speed fan control rather than on and off switching.
• You use Z-Wave alarm panels like Ring or ADT.
• You lack a neutral wire in your wall box.

Verdict: Zooz Double Switch for Fan and Light suits homeowners consolidating lighting and fan switching into a single-gang box on an open Z-Wave platform.

4 Best premium

Zooz Z-Wave Long Range On/Off Switch

Best for: High-load motor and direct 3-way wiring setups

Hub Requirement

Hub Required

Connectivity

Z-Wave Long Range

Wiring Requirement

Neutral Required

Circuit Type

3-Way, Single Pole

Switch Function

On/Off Switch

Maximum Load

600W LED, 1HP

View on Amazon: Zooz Z-Wave Long Range On/Off Switch

This ZOOZ ZEN75 800LR switch handles up to 600W LED or 1HP motors. It supports direct 3-way wiring without extra add-on switches, provided you have a neutral wire. The device uses Z-Wave Long Range for better coverage and includes S2 security. It fits standard Decora boxes and reports status instantly. You should use this if you need commercial-grade control for fans or motors in a Z-Wave home.

Pros

• Supports direct 3-way wiring without add-on switches
• Handles up to 600W LED or 1HP motors
• Uses Z-Wave Long Range for extended coverage
• Includes S2 authenticated security protocol

Cons

• Requires a separate Z-Wave hub to function
• Neutral wire is mandatory for installation
• Wall plate is not included in the package

Good fit if

• You need to control a fan or motor up to 1HP
• You want a direct 3-way setup without extra switches
• You require a switch for commercial 240V or 277V loads

Skip if

• You do not have a Z-Wave hub available
• Your electrical box lacks a neutral wire
• You need a dimmer rather than an on/off switch

Verdict: ZOOZ ZEN75 Heavy Duty 3-Way Switch is a robust option for users controlling high-load devices like motors or large lighting arrays. It suits those who need direct 3-way wiring and strong wireless range without adding extra physical switches.

5 Best 24v

Zooz 800 Series Z-Wave RGBW Dimmer

Best for: 12-24V DC LED strip color control

Smart Home Compatibility

Home Assistant, Homey, Hubitat, Z-Box

Hub Requirement

Z-Wave Hub Required

Connectivity

Z-Wave, Z-Wave Long Range

Switch Function

RGBW Dimmer

Voltage

24V

Dimensions

1.5 × 1.4 × 0.7 inches

View on Amazon: Zooz 800 Series Z-Wave RGBW Dimmer

The Zooz ZEN56 is an RGBW dimmer designed for 12–24 V DC LED strips. It uses the 800 Series Z-Wave chip for reliable communication and supports Z-Wave Long Range if your hub allows. You can control color, white, and brightness remotely. Local control works via wall switches. It measures 1.4 by 1.5 by 0.7 inches. It fits homes using Home Assistant, Homey, or Hubitat.

Pros

• Controls RGBW LED strips from 12 to 24 V DC
• Uses 800 Series Z-Wave chip for better range
• Supports Z-Wave Long Range for direct hub communication
• Compatible with Home Assistant, Homey, and Hubitat

Cons

• Limited to 12–24 V DC voltage only
• Does not support standard 120 V AC lighting
• Requires a separate Z-Wave hub to function

Good fit if

• You have 12–24 V DC LED strips
• You use Home Assistant, Homey, or Hubitat
• You want Z-Wave Long Range support

Skip if

• You need to control standard 120 V AC lights
• You do not have a Z-Wave hub
• You require Bluetooth or Wi-Fi connectivity

Verdict: Zooz ZEN56 24V RGBW Dimmer is the right pick if you need precise color control for low-voltage LED strips in a Z-Wave Long Range network.

6 Best lights

Zooz Extra Small Z-Wave Lighting Relay

Best for: Crowded boxes and existing simple switches

Smart Home Compatibility

SmartThings, Home Assistant, Hubitat

Hub Requirement

Hub Required

Connectivity

Z-Wave, Z-Wave Long Range

Switch Function

On/Off

Maximum Load

150W LED

Application

Lights

View on Amazon: Zooz Extra Small Z-Wave Lighting Relay

The Zooz ZEN57 is an extra-small smart relay designed for lighting automation. It supports up to 150W of LED load and uses Z-Wave Long Range for reliable connectivity. Its compact dimensions of 1.2 by 1 by 0.6 inches fit into crowded junction boxes or at the light fixture itself. This unit requires a Z-Wave hub and uses a dry contact switch, meaning it works with simple toggle or momentary wall switches without voltage on the input wires.

Pros

• Supports up to 150W LED load
• Z-Wave Long Range connectivity
• Compact 1.2 x 1 x 0.6 inch size
• Dry contact switch compatibility
• S2 authenticated security protocol

Cons

• Requires a Z-Wave hub
• Only supports simple toggle and momentary switches
• Does not support dimming functions

Good fit if

• You need a relay for a crowded switch box
• You want to use existing wall switches without rewiring
• You have a Z-Wave hub that supports Long Range

Skip if

• You require dimming capabilities for your lights
• You do not have a Z-Wave hub
• You need to control electronic or dimmer wall switches

Verdict: The Zooz ZEN57 XS Relay is a compact solution for automating lights up to 150W using Z-Wave Long Range. It is ideal for users who want to keep their existing simple toggle or momentary wall switches while gaining smart control through a compatible hub.

7 Best push button

Zooz Momentary Push-Button Switch

Best for: Garbage disposal and paired lighting control

Switch Function

Momentary Push-Button

Maximum Load

15 A

View on Amazon: Zooz Momentary Push-Button Switch

This is a Zooz momentary push-button switch designed for specific control tasks. It supports loads up to 15 A and accepts 14 AWG or 12 AWG wires. The slim 4” x 1.5” x 1.4” design fits into standard switch boxes. It provides local control for garbage disposals or works with Z-Wave dimmer modules for lighting. It is not a Z-Wave device itself. You get a white, simple interface for precise manual operation.

Pros

• Supports loads up to 15 A
• Accepts 14 AWG and 12 AWG wires
• Slim 4” x 1.5” x 1.4” design
• Momentary control for garbage disposals

Cons

• Not a Z-Wave device
• Requires external dimmer module for lighting control
• No app or remote integration

Good fit if

• You need dedicated garbage disposal control
• You want a slim switch for tight boxes
• You prefer physical momentary buttons

Skip if

• You need standalone Z-Wave automation
• You want app-based lighting control
• You need a standard on/off toggle

Verdict: Zooz ZAC99 Momentary Push Button Switch fits users who need dedicated garbage disposal control or a slim physical interface. It lacks independent smart features, making it best for manual or paired setups.

Specifications side by side

ZOOZ Smart Switches: 7 Picks Ranked by Specs

ZOOZ offers seven distinct models tailored to specific wiring needs and device types. You can choose from slim on/off switches, compact relays, or dimmers for low-voltage LED strips. All smart switches and relays require a Z-Wave hub for full functionality. They support Z-Wave Long Range for extended connectivity. The ZEN76 and ZEN75 handle 3-way circuits. The ZEN51 and ZEN57 fit crowded boxes.

Shoppers with existing mechanical switches may prefer the ZEN51 or ZEN57 for easy retrofitting. Those controlling fans and lights might select the ZEN30. The ZEN56 is designed for 24V DC LED strip color control. The ZAC99 serves as a dedicated push-button interface. Each product serves a unique role in your smart home setup.

Who ZOOZ Smart Switches Suit

ZOOZ targets users with complex wiring needs and compact spaces. The range spans from the tiny ZEN57 relay, measuring just one inch wide, to the larger ZEN75 heavy-duty switch. You can control standard lighting, fans, or 24V LED strips. Most models are slim on/off switches or relays that fit behind existing wall plates. However, the lineup lacks standalone smart dimmers for general bulbs or smart outlets. You also will not find battery-free sensors or voice assistant integration without a hub. This brand suits those who already use a Z-Wave hub and need specific form factors for crowded boxes or multi-way circuits.

How to choose the right ZOOZ switch

1. Check hub requirements

   Every smart switch and relay in this ZOOZ lineup requires a Z-Wave hub to function. You cannot connect these devices directly to your Wi-Fi network. The Zooz ZEN76 800LR On/Off Switch, for example, lists Hub Required in its attributes. This means you must own a compatible central controller before purchasing. Verify your existing hub supports Z-Wave Long Range for the best performance. If you lack a hub, you will need to buy one separately. This is a mandatory step for all models listed here, from the ZEN51 relay to the ZEN75 heavy-duty switch.

2. Match circuit type

   Select a switch based on your wiring configuration. If you control lights from two different locations, you need a 3-way circuit type. The Zooz ZEN76 800LR and the ZEN75 800LR both support 3-way setups. This allows you to toggle the light from multiple points. If you have a simple single-pole setup, a standard on/off switch works. The ZEN57 XS Relay is designed for simple toggle switches. Check your current wall plate configuration before buying. Wrong circuit types will not install correctly in your existing boxes.

3. Measure box space

   Wiring boxes in older homes are often small and crowded. The Zooz ZEN57 XS Relay measures just one inch wide and 0.6 inches high. This compact size fits into tight spaces where larger switches will not. The ZEN51 relay is also slim, at 1.4 inches wide. If your box is full of wires, choose a smaller relay. The ZEN75 heavy-duty switch is much larger, at 4.1 inches long. It requires more room. Measure your electrical box depth and width to ensure the device fits. This prevents installation failures and ensures safe wiring connections.

4. Verify voltage needs

   Standard household lights use 120V, but LED strips often use low voltage. The Zooz ZEN56 24V RGBW Dimmer is built specifically for 12-24V DC LED strips. It provides precise color control for these low-voltage systems. Do not use this dimmer on standard 120V bulbs. For standard lighting, the ZEN57 XS Relay handles up to 150W of load. Always check the voltage rating on the product page. Using the wrong device for your voltage can damage the switch or the lights. Match the device spec to your fixture power requirements exactly.

5. Confirm platform support

   Z-Wave devices work with many smart home platforms, but compatibility varies. The ZEN51 relay and ZEN30 800LR explicitly list SmartThings and Home Assistant support. This ensures you can integrate them into your existing ecosystem. The ZEN76 switch focuses on Z-Wave Long Range performance. Verify your hub supports the specific Z-Wave generation. Most ZOOZ devices require a hub, so ensure your hub is up to date. This prevents connection issues and ensures reliable automation. Check the compatibility list on the product page before ordering.

Frequently asked questions

See also

• best smart thermostats under 50
• best smart thermostats under 100