ZOOZ Double Switch Fan Light Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This zooz z wave long range double review covers the ZEN30 800LR. It is a white wall switch that controls two separate loads from one device. The unit features an 800 Series Z-Wave Long Range radio for extended network reach. It includes a dimmer for lights up to 75 watts and a relay for fans up to 15 amps. You must have a compatible Z-Wave hub to use it. The switch requires a neutral wire for installation. It fits in shallow boxes measuring 1.1 inches deep. This spec-based look explains how these features work together for your home.
What stands out
- Independent control of two loads via one switch plate
- 800 Series Z-Wave Long Range connectivity for better range
- Dimmer supports up to 75 watts of LED bulbs
- Relay handles up to 15 amps for fan or light
- Compact 1.1-inch depth fits crowded electrical boxes
Who it fits
Good fit for
You should buy this switch if you have a Z-Wave hub that supports the 800 Series Long Range protocol. It suits users who want to control both a light and a fan from a single wall plate. The virtual 3-way capability helps those without existing 3-way wiring. It is ideal for Home Assistant, Hubitat, or SmartThings users who can configure the necessary custom drivers. You need a neutral wire in your switch box for proper installation.
Who should skip it
Skip this device if you do not have a compatible Z-Wave hub. It does not work with Alexa, Google Home, or Z-Wave alarm panels like ADT, Ring, or Vivint. Avoid it if you need direct 3-way wiring support, as it only offers virtual 3-way functionality. Do not use it if you want speed control for ceiling fans, as the relay only provides on/off switching. You must also have a neutral wire available in your wall box.
Verdict: This double switch offers independent control for lights and fans using robust Z-Wave Long Range technology. It is a solid choice for users with compatible hubs who need a compact, dual-load solution.
Key specs for ZOOZ Double Switch
Connectivity: 800 Series Z-Wave Long Range
This radio standard offers greater range and faster signal speeds than older Z-Wave devices. You benefit from more reliable direct-to-hub communication if your hub supports the protocol. Even if your hub does not support Long Range, the switch still acts as a signal extender in a traditional mesh network, helping you cover larger homes without dead zones.
Maximum Load: 75W LED, 15A
The dimmer handles up to 75 watts of LED bulbs, while the relay supports loads up to 15 amps. This allows you to control ceiling or exhaust fans reliably. You can dim lights smoothly without flickering. This capacity suits most standard residential lighting and fan setups, ensuring the device does not overload during peak usage.
Switch Function: Dimmer
You get smooth brightness control for incandescent and LED bulbs via the paddle. The device supports double-tap to full brightness and adjustable ramp rates if your hub allows. This feature lets you set the perfect ambiance for your living space. Note that this function applies only to the lighting load, not the fan speed.
Circuit Type: Virtual 3-way
This switch does not support direct 3-way wiring with another physical switch. Instead, it uses software logic to mimic 3-way functionality through your hub. You benefit from flexible installation in rooms where traditional wiring is difficult. You must contact support for setup details, as this relies on your automation platform rather than physical wire connections.
Wiring Requirement: NEUTRAL WIRE REQUIRED
You must have a neutral wire in your switch box for this device to function. This is a critical installation step. If your existing box lacks a neutral wire, this switch will not work without additional wiring modifications. Always check your wiring before purchasing to avoid installation failures or the need for an electrician to add new lines.
Physical Design and Build Specs
The Zooz ZEN30 800LR measures 1.7 inches wide by 4.1 inches tall. Its depth is listed at just 1.1 inches. This slim profile helps it fit into shallow or crowded electrical boxes. The faceplate is white. This standard finish blends with most North American wall decor. The device weighs enough to stay secure in the box, though exact weight is not listed. You get two independent control sections on the front. One section is a dimmer paddle. It adjusts light brightness smoothly. The other is a relay button. It turns connected fans or other loads on or off. There is no speed control for the fan. The layout keeps lighting and fan functions separate. This design prevents accidental fan speed changes when you only want to adjust light levels. The unit requires a neutral wire for installation. It uses pigtail wires for easier connections. This setup simplifies wiring compared to traditional switches. The compact size and standard white color make it a practical choice for standard residential switch boxes. It does not protrude excessively from the wall. The build focuses on fitting into existing infrastructure without major modifications. According to the listing, the device is ETL certified for safety. This certification ensures it meets North American electrical standards. The physical design prioritizes compatibility with standard box sizes. You do not need to replace your electrical boxes to install this unit. The white finish remains consistent across the entire face. This uniform look maintains a clean aesthetic in your home.
Setup and Everyday Use Guide
Installation requires a neutral wire. The unit measures 1.1 inches deep, allowing it to fit into shallow or crowded electrical boxes. Pigtail wires simplify the connection process. You must connect this device to an open Z-Wave hub. It does not work with Alexa directly, as Alexa is not a Z-Wave hub. It also excludes Z-Wave alarm panels like ADT, Ring, Vivint, or Alarm.com. For best results, use a Z-Box Hub. It also supports Home Assistant and Hubitat. SmartThings users need a custom device driver from the seller. This driver is required for proper functionality.
Daily operation involves two independent controls. The paddle dims lights for incandescent or LED bulbs, supporting up to 75 watts of LEDs. You can adjust the ramp rate and dimming speed if your hub allows. Double-tap the paddle for full brightness. The relay button turns ceiling or exhaust fans on or off. It does not control fan speed. You can use the button for scene control if your hub supports multi-tap commands. The device acts as a signal extender in a traditional mesh network. It only supports virtual 3-way switching. You cannot wire it as a direct 3-way switch. Contact support for virtual 3-way setup details. The unit is ETL certified for North American safety standards. Register the product for an extended five-year warranty.
Before You Buy This Switch
You need a compatible Z-Wave hub to use this device. It does not work with Alexa directly, as Alexa is not a Z-Wave hub. You must verify your hub supports Z-Wave Long Range for full features. Home Assistant, Hubitat, and SmartThings with a custom driver are known to work. Vivint, ADT, Ring, and Alarm.com are not supported. You require a neutral wire for installation. The unit fits in shallow boxes due to its 1.1-inch depth. You control lights via dimming and fans via on/off only. There is no fan speed control. You cannot use direct 3-way wiring, only virtual setups. This switch belongs in a broader home automation ecosystem. It complements smart thermostats by managing lighting and ventilation loads. You should plan your network topology carefully. The 800 Series radio helps extend range. You benefit from reliable mesh networking if your hub allows. Check your existing setup before purchasing to avoid compatibility issues.
Check before you buy
- Confirm your hub supports Z-Wave Long Range
- Verify you have a neutral wire available
- Check compatibility with Home Assistant or Hubitat
- Ensure you do not use Ring or ADT
The product at a glance
Zooz Double Switch Fan and Light Dimmer
Best for: single-gang fan and light combo fixtures
- Smart Home Compatibility
- Home Assistant, Hubitat, SmartThings
- Hub Requirement
- Hub Required
- Connectivity
- 800 Series Z-Wave Long Range
- Wiring Requirement
- NEUTRAL WIRE REQUIRED
- Circuit Type
- Virtual 3-way
- Switch Function
- Dimmer
View on Amazon: Zooz Double Switch Fan and Light Dimmer Affiliate link
This double switch fits into a single-gang box to control both a light and an exhaust or ceiling fan. You get an independent dimmer rated up to 75W for LEDs alongside a 15A on/off relay. It connects via 800-series Z-Wave Long Range and requires an open hub plus a neutral wire. It suits households needing dual control without widening the wall box.
Pros
- Controls two separate circuits from a shallow 1.1-inch deep single-gang housing
- Supports 800 Series Z-Wave Long Range connectivity
- Handles up to 15A relay loads for ceiling and exhaust fans
- Includes a 5-year extended warranty after product registration
Cons
- Offers on and off operation only with no fan speed adjustment
- Supports virtual 3-way setups only with no direct 3-way wiring
- Requires a neutral wire and a compatible standalone Z-Wave hub
Good fit if
- You need independent fan power and dimmable lighting in a single-gang electrical box.
- You run an open Z-Wave platform such as Home Assistant, Hubitat, or Z-Box.
- You have neutral wiring available inside the wall box.
Skip if
- You need multi-speed fan control rather than standard on and off power.
- You rely on alarm systems like Ring, Vivint, ADT, or Alarm.com as your primary hub.
- You need a direct three-way wired connection with existing mechanical switches.
Verdict: Zooz Z-Wave Fan and Light Double Switch gives open-hub Z-Wave owners independent light dimming and fan on/off switching in a single-gang space. It fits setups with neutral wiring where variable fan speed is not required.
Specifications side by side
| Spec | Zooz Double Switch Fan and Light Dimmer |
|---|---|
| Smart Home Compatibility | Home Assistant, Hubitat, SmartThings |
| Hub Requirement | Hub Required |
| Connectivity | 800 Series Z-Wave Long Range |
| Wiring Requirement | NEUTRAL WIRE REQUIRED |
| Circuit Type | Virtual 3-way |
| Switch Function | Dimmer |
| Maximum Load | 75W LED, 15A |
| Size | 1.7" x 4.1" x 1.1" |
| Color | White |
| Model | ZEN30 800LR |
Frequently asked questions
Does the Zooz ZEN30 control fans and lights independently?
Yes, this device offers independent load control for both lights and fans. You can manage each circuit separately from a single wall switch. This setup allows you to adjust fan speed and light dimming without affecting the other load. It is designed for users who need distinct management for these two common household fixtures.
What smart home platforms support this double switch?
The ZOOZ ZEN30 is compatible with SmartThings and Home Assistant. It connects via Z-Wave, requiring a hub that supports this protocol. You cannot use it directly with voice assistants like Alexa or Google Home. You must verify that your chosen hub supports Z-Wave Long Range for optimal performance and feature access.
Is a neutral wire required for installation?
Yes, installation requires a neutral wire connection. The device uses pigtail wires to simplify this connection process. This requirement ensures stable power for the internal radio and electronics. You must confirm your electrical box has a neutral wire before attempting to install this specific double switch model.
Does this switch work without a hub?
No, a hub is required to operate this device. It does not connect directly to Wi-Fi or Bluetooth. You must pair it with an open Z-Wave hub to enable smart features. Direct control from a phone or voice assistant is only possible through the hub's integration.
What are the physical dimensions of the ZEN30?
The unit measures 1.7 inches wide by 4.1 inches tall. Its depth is listed at just 1.1 inches. This slim profile helps it fit into shallow or crowded electrical boxes. The faceplate is white, which is a standard finish that blends with most wall decor styles.
What connectivity standard does this switch use?
It uses the 800 Series Z-Wave Long Range radio. This standard offers greater range and faster signal speeds than older Z-Wave devices. You benefit from more reliable direct-to-hub communication if your hub supports the protocol. This connectivity ensures stable control over your connected loads.