Best Stelpro Line Voltage Thermostats: 7 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Stelpro makes line voltage thermostats for electric baseboards, convectors and fan-forced wall heaters, none of them Wi-Fi connected, so this comparison covers its digital and mechanical models. Our top pick is the ST402P: a programmable baseboard and convector thermostat rated to 4000W at 240V, with four weekday and two weekend events, 1°F thermistor control and a 5-year warranty. Fan-forced heaters need the FF versions, such as the ST402PFF, because they use a three-wire connection. All details come from listings and published specs; nothing here was tested hands-on.
Our top pick: Stelpro 4000W Programmable Line Voltage Thermostat.
Quick picks
Our 7 picks
Stelpro 4000W Programmable Line Voltage Thermostat
Best for: Overall
- System Compatibility
- Electric baseboards and convectors
- Voltage
- 120V, 208V, 240V
- Wiring Requirement
- Two-wire
- Programmability
- 4 weekday and 2 weekend events
- Dimensions
- 1.38 × 4.94 × 4.94 inches
- Weight
- 14.4 ounces
View on Amazon: Stelpro 4000W Programmable Line Voltage Thermostat Affiliate link
The ST402P is a programmable thermostat for electric baseboards and convectors, rated to 2000W at 120V, 3475W at 208V and 4000W at 240V. It allows four weekday and two weekend events, keeps settings for two hours through power failures, and holds the room within 1°F using a thermistor. It installs on two wires with an S3 mounting plate and carries a 5-year warranty.
Pros
- Weekday and weekend programs
- Holds within 1°F
- 5-year warranty
Cons
- Not for fan heaters
- No Wi-Fi
Good fit if
- You want overnight setbacks on baseboards
- You have up to 4000W on 240V
Skip if
- You heat with a fan-forced unit
- You want app control
Verdict: The best Stelpro for most baseboard rooms.
Stelpro ST402PFF 4000W Programmable Wall Heater Thermostat
Best for: Fan heaters
- System Compatibility
- Fan-forced wall and ceiling heaters
- Voltage
- 120V, 208V, 240V
- Wiring Requirement
- Three-wire
- Programmability
- 4 weekday and 2 weekend events
- Sensor Support
- Thermistor
- Dimensions
- 1.38 × 4.94 × 4.94 inches
View on Amazon: Stelpro ST402PFF 4000W Programmable Wall Heater Thermostat Affiliate link
The ST402PFF is the fan-forced counterpart of the ST402P, built for wall and ceiling fan heaters and forced-air units with a three-wire connection. It keeps the same 4000W rating, four weekday and two weekend events and 1°F control, and adds a timed boost for maximum output on demand. It is not for baseboards.
Pros
- Made for fan heaters
- Timed heat boost
- Programmable
Cons
- Not for baseboards
- Three-wire install
Good fit if
- You have a bathroom or entry fan heater
- You want a schedule
Skip if
- You heat with baseboards
- You want a mechanical dial
Verdict: The programmable pick for fan heaters.
Stelpro 4000W Non-Programmable Line Voltage Thermostat
Best for: Non-programmable
- System Compatibility
- Electric baseboards and convectors
- Voltage
- 120V, 208V, 240V
- Programmability
- Non-programmable
- Dimensions
- 1.38 × 4.35 × 4.94 inches
- Weight
- 11.2 ounces
View on Amazon: Stelpro 4000W Non-Programmable Line Voltage Thermostat Affiliate link
The ST402NP is a non-programmable digital thermostat for baseboards and convectors up to 4000W at 240V. A one-press Eco mode drops the temperature when you leave and restores it with another press, and thermistor sensing holds within 1°F. Two-wire install, sealed casing and a 5-year warranty.
Pros
- One-press Eco setback
- Holds within 1°F
- Sealed casing
Cons
- No schedules
- Not for fan heaters
Good fit if
- You want digital accuracy without programming
- You leave at irregular times
Skip if
- You want automatic setbacks
- You have a fan heater
Verdict: Set-and-forget digital control.
Stelpro 4000W Non-Programmable Thermostat
Best for: Fan heater basics
- System Compatibility
- Fan heaters, forced-air units
- Voltage
- 120V, 208V, 240V
- Wiring Requirement
- 3-wire
- Programmability
- Non-programmable
- Dimensions
- 1.38 × 4.94 × 4.94 inches
- Weight
- 9.6 ounces
View on Amazon: Stelpro 4000W Non-Programmable Thermostat Affiliate link
The ST402NPFF brings Eco setback and a timed heat boost to fan-forced wall and ceiling heaters up to 4000W at 240V. It holds within 1°F, wires with three conductors for forced-air units, and carries a 5-year warranty. It is not for baseboards or convectors.
Pros
- Eco and boost
- For fan heaters
- 1°F control
Cons
- No schedules
- Three-wire install
Good fit if
- You want a simple digital fan-heater control
- You want fast warm-ups
Skip if
- You heat with baseboards
- You want weekday programs
Verdict: A simple digital control for fan heaters.
Stelpro Non-Programmable 2500W Line Voltage Thermostat
Best for: Small rooms
- System Compatibility
- Electric baseboards, convectors
- Voltage
- 120V, 208V, 240V
- Programmability
- Non-programmable
- Dimensions
- 1.38 × 4.35 × 4.94 inches
- Weight
- 9.6 ounces
View on Amazon: Stelpro Non-Programmable 2500W Line Voltage Thermostat Affiliate link
The ST252NP is the lower-wattage version of the ST402NP: 1250W at 120V, 2160W at 208V and 2500W at 240V, for baseboards and convectors. Eco setback, 1°F thermistor control, a two-wire install and a 5-year warranty carry over.
Pros
- Lower price than 4000W model
- Eco setback
- 5-year warranty
Cons
- 2500W limit
- Not for fan heaters
Good fit if
- Your room has one small baseboard
- You want digital accuracy
Skip if
- Your heaters exceed 2500W
- You need a schedule
Verdict: A good fit for smaller rooms.
Stelpro Double Pole Line Voltage Thermostat
Best for: Dial
- System Compatibility
- Baseboards, convectors, fan heaters
- Voltage
- 120V to 277V
- Programmability
- No programming
- Dimensions
- 4.6 × 2.8 × 2 inches
View on Amazon: Stelpro Double Pole Line Voltage Thermostat Affiliate link
The SWT2F is a mechanical, double-pole line voltage thermostat for 120-277V heaters up to 22A, covering baseboards, fan-forced units and commercial heaters. A turn-to-set knob runs from 50 to 90°F. Double pole means it fully disconnects power when switched off. Warranty is 1 year. The listing's spec field shows SWT1F, but the title and features describe the double-pole SWT2F.
Pros
- Double pole full shutoff
- Works with fan heaters
- 120-277V
Cons
- Dial only, no readout
- 1-year warranty
Good fit if
- You want a simple knob
- You need a true off position
Skip if
- You want 1°F accuracy
- You want Eco setback
Verdict: The mechanical pick with full shutoff.
Stelpro SWT1F Single Pole Thermostat
Best for: Budget
- System Compatibility
- Electric baseboards
- Voltage
- 120V to 277V
- Wiring Requirement
- 2 wire connection
- Programmability
- No programming
- Circuit Type
- Single Pole
- Dimensions
- 4.6 × 3 × 2 inches
View on Amazon: Stelpro SWT1F Single Pole Thermostat Affiliate link
The SWT1F is the single-pole mechanical version: a turn-to-set dial for electric baseboards, wall fan heaters and commercial fan-forced heaters on 240V, with a 2-wire connection. It is the cheapest Stelpro here. A single-pole thermostat reduces heat when set to off but still lets current flow.
Pros
- Lowest price
- Two-wire install
- Fits fan heaters too
Cons
- No full shutoff
- No digital display
Good fit if
- You want the cheapest replacement
- You are swapping a single-pole unit
Skip if
- You want a true off position
- You want precise control
Verdict: The budget Stelpro.
Specifications side by side
| Spec | Stelpro 4000W Programmable Line Voltage Thermostat | Stelpro ST402PFF 4000W Programmable Wall Heater Thermostat | Stelpro 4000W Non-Programmable Line Voltage Thermostat | Stelpro 4000W Non-Programmable Thermostat | Stelpro Non-Programmable 2500W Line Voltage Thermostat | Stelpro Double Pole Line Voltage Thermostat | Stelpro SWT1F Single Pole Thermostat |
|---|---|---|---|---|---|---|---|
| System Compatibility | Electric baseboards and convectors | Fan-forced wall and ceiling heaters | Electric baseboards and convectors | Fan heaters, forced-air units | Electric baseboards, convectors | Baseboards, convectors, fan heaters | Electric baseboards |
| Voltage | 120V, 208V, 240V | 120V, 208V, 240V | 120V, 208V, 240V | 120V, 208V, 240V | 120V, 208V, 240V | 120V to 277V | 120V to 277V |
| Wiring Requirement | Two-wire | Three-wire | not stated | 3-wire | not stated | not stated | 2 wire connection |
| Programmability | 4 weekday and 2 weekend events | 4 weekday and 2 weekend events | Non-programmable | Non-programmable | Non-programmable | No programming | No programming |
| Sensor Support | not stated | Thermistor | not stated | not stated | not stated | not stated | not stated |
| Circuit Type | not stated | not stated | not stated | not stated | not stated | not stated | Single Pole |
| Dimensions | 1.38 × 4.94 × 4.94 inches | 1.38 × 4.94 × 4.94 inches | 1.38 × 4.35 × 4.94 inches | 1.38 × 4.94 × 4.94 inches | 1.38 × 4.35 × 4.94 inches | 4.6 × 2.8 × 2 inches | 4.6 × 3 × 2 inches |
| Weight | 14.4 ounces | 9.6 ounces | 11.2 ounces | 9.6 ounces | 9.6 ounces | not stated | 6.24 ounces |
| Size | ST402P - 4000W | 4000W Programmable | ST402NP - 4000W | 4000W Non-programmable | ST252NP - 2500W | 2 Poles | 1 Pole |
| Color | White | White | White | White | White | White | White |
| Model | ST402P - 4000W | ST402PFF - 4000W | ST402NP - 4000W | ST402NPFF - 4000W | ST252NP - 2500W | SWT1F | SWT1F |
Stelpro thermostats by heater and control
Baseboards and convectors, digital: ST402P (programmable, 4000W), ST402NP (non-programmable with Eco setback, 4000W), ST252NP (non-programmable, 2500W). Fan-forced wall and ceiling heaters, digital: ST402PFF (programmable with boost), ST402NPFF (non-programmable with Eco and boost). Mechanical dials for baseboards, convectors and fan heaters: SWT2F (double pole, 22A, 120-277V) and SWT1F (single pole, 22A).
Choose a P model if you want the heat to drop while you sleep or work, an NP model if you want set-and-forget with a one-press Eco setback, the FF versions for any heater with a fan, and the SWT dials if you want the cheapest mechanical control.
Stelpro against smart line voltage thermostats
Smart line voltage models from Mysa, meross and KALOR TECH add Wi-Fi, apps and voice control at a higher price. Stelpro's digital models hold within 1°F and carry a 5-year warranty, but they have no remote control. Against Honeywell Home and Cadet basics, Stelpro offers separate FF models for fan heaters and wattage-specific versions.
If your heating setup also relies on a circulating pump, our guide to the best water pumps with thermostat compares those models by their published specs.
Choosing a Stelpro thermostat
-
Baseboard or fan heater
Standard ST models fit baseboards and convectors; ST...FF models fit fan-forced heaters. They are not interchangeable.
-
Match the wattage
4000W models handle 2000W at 120V, 3475W at 208V and 4000W at 240V; the ST252NP tops out at 2500W at 240V.
-
Single or double pole
The double-pole SWT2F fully disconnects power when off; the single-pole SWT1F does not.
-
Power failures
The programmable ST402P keeps its settings for two hours during a power cut.
Frequently asked questions
Are Stelpro thermostats smart?
No. They are line voltage digital or mechanical thermostats without Wi-Fi.
Can I use the ST402P on a fan heater?
No. Fan-forced heaters need the ST402PFF, which uses a three-wire connection.
What is the difference between single and double pole?
A double-pole thermostat like the SWT2F cuts both lines when off; a single-pole model still lets current flow.
What warranty do Stelpro digital thermostats have?
The ST-series listings state a 5-year Stelpro warranty.






