6 Best Alternatives to the KMC 3-Outlet Smart Plug Power (2026)

How each alternative compares

Kasa Outdoor Smart Dimmer Plug

The Kasa Outdoor Smart Dimmer Plug shifts focus from indoor power strips to outdoor lighting control. Unlike the KMC strip, this device is designed for exterior use, making it suitable for string lights in wet conditions. It offers dimming functionality rather than simple on/off switching, which provides more nuanced control over brightness levels. The unit connects via Wi-Fi without a hub, similar to the KMC model, and supports Alexa and SmartThings. However, it controls a single outlet rather than multiple independent sockets. You should choose this if you need weather-resistant dimming for outdoor decor instead of indoor surge protection for multiple electronics.

TREATLIFE Single-Pole Wi-Fi Smart Light Switch

The TREATLIFE Single-Pole Wi-Fi Smart Light Switch replaces wall switches rather than plugging into outlets. This requires a neutral wire and professional installation, unlike the plug-and-play KMC strip. It offers single-pole control for lights via voice commands or an app, supporting Alexa, Google Home, and SmartThings. While the KMC strip protects devices from surges and allows independent control of three plugs, this switch integrates directly into your home wiring. It is best for users who want to automate hardwired lighting fixtures without cluttering outlets. You will need to verify your wiring setup before choosing this over a simple smart plug strip.

GHome Smart 2-in-1 Dual Smart Plug

The GHome Smart 2-in-1 Dual Smart Plug offers two outlets in a compact form factor, whereas the KMC strip provides three. Both devices operate without a hub and support Alexa and Google Home for voice control. The GHome model is designed to save wall space while still allowing independent control of two devices. It lacks the surge protection rating found in the KMC strip, which offers 490 joules of protection. This makes the GHome unit better for low-power devices where space is tight. You should pick this alternative if you need fewer than three controlled outlets and prioritize a smaller footprint over higher surge protection capacity.

ELEGRP Outdoor Wi-Fi Smart Dimmer Plug

The ELEGRP Outdoor Wi-Fi Smart Dimmer Plug is built for outdoor environments with an IP66 rating, making it resistant to rain and dust. This contrasts with the indoor-focused KMC strip. It provides dimming capabilities for string lights rather than simple on/off switching for multiple electronics. The device connects via Wi-Fi without a hub and supports Alexa. However, it only controls one outlet and does not offer surge protection for sensitive indoor devices. You should choose this if your primary need is managing outdoor lighting in wet conditions. It is not suitable for indoor use where you need to control multiple devices simultaneously with independent scheduling.

Lutron Claro Smart Accessory Switch

The Lutron Claro Smart Accessory Switch requires a Lutron hub to function, unlike the hub-free KMC strip. It is designed as an add-on for existing Lutron systems, allowing multi-location control of lights. This device supports Alexa, Google Home, and Apple HomeKit, offering broader ecosystem support than the KMC model. However, it is a wall switch accessory rather than a power strip, meaning it does not provide extra outlets or surge protection. You should consider this if you already own a Lutron system and need additional control points for lighting. It is not a direct replacement for users who need multiple independent power outlets without existing smart home infrastructure.

MOES WiFi Ceiling Fan Light Switch

The MOES WiFi Ceiling Fan Light Switch is a dedicated controller for ceiling fans and lights, requiring a neutral wire for installation. Unlike the KMC plug strip, this device integrates into your wall wiring and supports single gang boxes. It allows separate control of fan speed and light brightness via voice commands or an app, supporting Alexa, Google Home, and Tuya. The KMC strip offers three independent outlets with surge protection, while this switch offers specialized control for ceiling fixtures. You should choose this if you need to automate a ceiling fan and light combo. It is not suitable for users who want to plug in and control multiple portable devices independently.

Quick picks

Our 7 picks

1 Best overall

KMC 3-Outlet Smart Plug Power Strip

Best for: Controlling multiple devices without a hub

Smart Home Compatibility

Alexa, Google Assistant

Hub Requirement

No Hub Required

Maximum Load

15A, 1875W

Application

Lights

View on Amazon: KMC 3-Outlet Smart Plug Power Strip Affiliate link

This KMC smart power strip gives you three independently controlled outlets. It requires no hub for setup. You can control it via Alexa or Google Assistant. The unit includes 490 joules of surge protection. A 4-foot cord and low-profile plug help it fit behind furniture. It supports up to 15 amps and 1875 watts. This makes it suitable for managing multiple devices in one location.

Pros

• Three independently controlled smart outlets
• No hub required for setup
• Compatible with Alexa and Google Assistant
• 490 joules of surge protection

Cons

• Single color option available
• Limited to 15 amp maximum load
• Basic surge protection rating

Good fit if

• You need to control multiple devices from one location
• You want to avoid setting up a separate hub
• You require voice control for your electronics

Skip if

• You need individual outlet power metering
• You require outdoor weatherproofing
• You need more than three controlled outlets

Verdict: KMC 3-Outlet Smart Power Strip offers independent control for three devices without a hub. It fits users who need basic smart strip functionality with voice support.

2 Best budget

Kasa Outdoor Smart Dimmer Plug

Best for: outdoor string light dimming

Smart Home Compatibility

Alexa, Google Assistant, SmartThings

Hub Requirement

No Hub Required

Connectivity

2.4GHz Wi-Fi

Switch Function

Dimmer

Maximum Load

300W Incandescent, 150W LED/CFL

Application

Lights

View on Amazon: Kasa Outdoor Smart Dimmer Plug Affiliate link

This is a weather-resistant smart dimmer plug designed for outdoor string lights. It features an IP64 rating to handle dust and water splashes. You can control brightness via the Kasa app or voice commands with Alexa and Google Assistant. It connects on 2.4GHz Wi-Fi without a hub. The unit supports up to 300W incandescent or 150W LED loads. It allows scheduling and grouping for automated lighting control.

Pros

• IP64 weather resistance for outdoor use
• Compatible with Alexa and Google Assistant
• No hub required for setup
• Supports scheduling and grouping in the app

Cons

• Limited to 2.4GHz Wi-Fi networks only
• Max load is only 150W for LED/C bulbs
• Only one dimmer socket available

Good fit if

• You need to control outdoor string lights remotely
• You want voice control via Alexa or Google
• You prefer direct Wi-Fi connection without a hub

Skip if

• You require 5GHz Wi-Fi connectivity
• You need to dim non-dimmable bulbs
• You need to control high-wattage LED loads over 150W

Verdict: Kasa Outdoor Smart Dimmer Plug is a solid choice for automating outdoor lighting with voice commands. It fits users who need weather-resistant dimming for string lights on a 2.4GHz network.

3 Best premium

TREATLIFE Single-Pole Wi-Fi Smart Light Switch

Best for: Single-pole on/off lighting control

Smart Home Compatibility

Alexa, Google Home, SmartThings

Hub Requirement

No Hub Required

Connectivity

2.4 GHz Wi-Fi

Wiring Requirement

Neutral Required

Circuit Type

Single Pole

Switch Function

On/Off Switch

View on Amazon: TREATLIFE Single-Pole Wi-Fi Smart Light Switch Affiliate link

This TREATLIFE smart switch controls lighting via 2.4 GHz Wi-Fi without a hub. It works with Alexa, Google Home, and SmartThings. The unit requires a neutral wire and supports single-pole wiring only. You can manage lights through the Smart Life app or voice commands. It includes a screwless wall plate. This model is an on/off switch and does not support dimming functions.

Pros

• Connects via 2.4 GHz Wi-Fi without a hub
• Compatible with Alexa, Google Home, and SmartThings
• Includes a screwless snap-on wall plate
• App control for scheduling and remote access

Cons

• Requires a neutral wire for installation
• Incompatible with 5 GHz Wi-Fi networks
• Does not support dimming or 3-way setups

Good fit if

• You have a neutral wire in your switch box
• You need a simple on/off switch for standard bulbs
• You use Alexa, Google Home, or SmartThings

Skip if

• You require a dimming function for your lights
• You need to install the switch in a 3-way setup
• Your home network only uses 5 GHz Wi-Fi

Verdict: TREATLIFE Single-Pole Smart Light Switch is a practical option for single-pole installations with neutral wires. It suits users who want basic on/off control via voice or app without adding a hub.

4 Also great

GHome Smart 2-in-1 Dual Smart Plug

Best for: Dual device control in a compact space

Smart Home Compatibility

Alexa, Google Home Assistant

Hub Requirement

No Hub Required

Connectivity

2.4GHz Wi-Fi, Bluetooth

Maximum Load

15A / 1800W

View on Amazon: GHome Smart 2-in-1 Dual Smart Plug Affiliate link

This GHome Smart plug combines two independent outlets into one compact unit. It supports 15A and 1800W loads, suitable for heavy-duty devices. The device connects via 2.4GHz Wi-Fi and Bluetooth, requiring no hub. You can control it through the GHome, Smart Life, or Tuya apps. Voice control works with Alexa and Google Home. It includes timer scheduling and surge protection.

Pros

• Two independent outlets in a single compact space
• Supports up to 15A and 1800W
• Connects via 2.4GHz Wi-Fi and Bluetooth
• Compatible with Alexa and Google Home
• Includes timer and schedule automation features

Cons

• Does not support 5GHz Wi-Fi networks
• Requires initial setup via the GHome app before linking to voice assistants
• Lacks real-time energy monitoring capabilities

Good fit if

• You need to control two separate devices from one wall outlet
• You want to automate lights or fans with scheduled timers
• You prefer a compact design that does not block adjacent sockets

Skip if

• You only have 5GHz Wi-Fi networks available
• You require real-time energy usage monitoring for each outlet
• You want to link directly to voice assistants without using an app first

Verdict: GHome Smart Dual 15A Compact Plug offers a practical two-outlet solution for users who need independent control of multiple devices without sacrificing wall space. It suits those who value compact design and basic scheduling over energy tracking.

5 Also great

ELEGRP Outdoor Wi-Fi Smart Dimmer Plug

Best for: dimming outdoor string lights in rain

Smart Home Compatibility

Alexa, Google Assistant

Hub Requirement

No Hub Required

Connectivity

2.4GHz Wi-Fi

Switch Function

Dimmer

Maximum Load

150W LED/CFL, 400W Incandescent, 1/2 HP

Application

Lights

View on Amazon: ELEGRP Outdoor Wi-Fi Smart Dimmer Plug Affiliate link

This ELEGRP PQR11 is a waterproof smart dimmer plug designed for outdoor use. It features an IP66 rating to withstand rain and temperature extremes from -20°C to 50°C. The device supports 2.4GHz Wi-Fi and works with Alexa and Google Assistant. It dims dimmable LED, CFL, incandescent, and halogen lights. You can control brightness from 1% to 100% via the app or voice. No hub is required for setup.

Pros

• IP66 waterproof housing resists heavy rain and moisture
• Adjusts brightness from 1% to 100% for dimmable lights
• Compatible with Alexa and Google Assistant for voice control
• Supports 2.4GHz Wi-Fi with no hub required

Cons

• Only supports 2.4GHz Wi-Fi networks
• Motor power limit of 1/2 HP restricts pump usage
• Maximum load is lower for LED/CFL (150W) than incandescent (400W)

Good fit if

• You need to control outdoor string lights or landscape lighting
• You want voice control for dimming without a separate hub
• You require a weatherproof outlet for harsh outdoor conditions

Skip if

• You only have a 5GHz Wi-Fi network available
• You need to control non-dimmable lights
• You plan to power motors exceeding 1/2 HP

Verdict: ELEGRP IP66 Outdoor Smart Dimmer Plug is a solid option for managing outdoor lighting. It fits users who need reliable dimming control in wet environments. It is not suitable for standard on/off outlet needs or 5GHz-only networks.

6 Best apple homekit

Lutron Claro Smart Accessory Switch

Best for: Multi-location control with existing Lutron switches

Smart Home Compatibility

Alexa, Apple HomeKit, Google Home

Hub Requirement

Hub Required

Wiring Requirement

No Neutral Required

Circuit Type

3-Way, Multi-Location

Switch Function

Accessory Switch

Application

Lights

View on Amazon: Lutron Claro Smart Accessory Switch Affiliate link

This is a smart accessory switch, not a standalone device. You need an existing Lutron Diva or Claro smart switch to use it. It supports Apple HomeKit, Alexa, and Google Home. The unit requires a Lutron hub for connectivity. It fits standard wall boxes and needs no neutral wire. You get three tap controls for preset, full on, or fade off. It is a single pack in black.

Pros

• Native Apple HomeKit compatibility
• No neutral wire required
• Works with existing Lutron smart switches
• Does not count toward hub device limit

Cons

• Requires a separate Lutron smart hub
• Cannot operate as a standalone switch
• Must be paired with a specific Lutron dimmer or switch

Good fit if

• You already own a Lutron Diva or Claro smart switch
• You need a second control point for a multi-location setup
• You use Apple HomeKit and want native support

Skip if

• You want a single switch without additional hardware
• You do not have a Lutron smart hub
• You need a standalone power strip or outlet

Verdict: Lutron Caseta Claro Accessory Switch is a specialized add-on for existing Lutron systems. It fits users who need a second control point for a multi-location light setup without running new wires.

7 Best tuya

MOES WiFi Ceiling Fan Light Switch

Best for: ceiling fan and light control

Smart Home Compatibility

Alexa, Google Home

Hub Requirement

No Hub Required

Connectivity

Wi-Fi 2.4 GHz

Wiring Requirement

Neutral Required

Switch Function

Fan and Light Controller

Maximum Load

1.5A Fan

View on Amazon: MOES WiFi Ceiling Fan Light Switch Affiliate link

This MOES switch controls ceiling fans and lights separately via Wi-Fi. It requires a neutral wire and 2.4 GHz connection. You get voice control with Alexa and Google Home. The app allows timer settings and group control. It fits single gang boxes only. This unit is designed for specific fan and light setups rather than general outlet power.

Pros

• Separate control for fan speed and light
• Compatible with Alexa and Google Home
• No hub required for Wi-Fi setup
• Timer and countdown scheduling via app

Cons

• Requires a neutral wire for installation
• Only fits single gang switch boxes
• Maximum fan load limited to 1.5A

Good fit if

• You need to control a ceiling fan and light separately
• Your switch box has a neutral wire available
• You want voice control without a separate hub

Skip if

• You need to control standard power outlets
• Your switch box requires a 2 or 3 gang plate
• Your ceiling fan exceeds 1.5A current draw

Verdict: MOES WiFi Smart Ceiling Fan Light Switch is a dedicated controller for ceiling fans and lights. It suits users with single gang boxes who need separate fan speed and light control via voice commands.

Specifications side by side

Frequently asked questions