ZOOZ 800 Series Smart On/Off vs ZOOZ Double Switch Fan Light: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the zooz 800 series z wave long vs z wave long range double to decide which switch fits your room. Both devices use the 800 Series Z-Wave Long Range protocol for better range and faster communication. They both require a Z-Wave hub and a neutral wire for installation. The main difference lies in their function. The first model is a single on/off switch. The second is a double switch that controls both a light dimmer and a fan relay independently.
Key differences
| Aspect | Zooz 800 Series Smart On/Off Switch | Zooz Double Switch Fan and Light Dimmer |
|---|---|---|
| Switch Function | On/Off Switch | Dimmer and Fan Relay |
| Circuit Type | 3-Way, 4-Way, 5-Way | Virtual 3-way |
| Maximum Load | not listed | 75W LED, 15A |
| Smart Home Compatibility | not listed | Home Assistant, Hubitat, SmartThings |
Which one should you choose?
Choose Zooz 800 Series Smart On/Off Switch if
- You need a simple on/off switch for a standard light fixture.
- You have existing 3-way or 4-way switch setups that require physical wiring solutions.
- You want replaceable paddles in multiple colors.
Choose Zooz Double Switch Fan and Light Dimmer if
- You control a ceiling fan and light combo from one location.
- You want independent dimming control for LED lights up to 75 watts.
- You use Home Assistant or Hubitat for your home automation system.
Verdict: Choose the Zooz 800 Series Smart On/Off Switch if you need reliable physical 3-way wiring for standard lighting. Select the Zooz Double Switch Fan Light if you need to control a fan and dimmable light independently from a single device.
Zooz Switches Compared by Spec
Switch Functionality
The Zooz 800 Series Smart On/Off Switch (ZEN76) is a dedicated on/off device. It controls a single load without dimming capabilities. You use it for standard lighting circuits that do not require brightness adjustment. The Zooz Double Switch Fan Light (ZEN30) offers dual control in one unit. It dims lights up to 75 watts of LEDs and includes a relay for ceiling fans. The relay provides on/off control for fans but does not offer speed control. This makes the ZEN30 suitable for fan/light combos, while the ZEN76 is better for simple lighting.
3-Way Wiring Support
Physical multi-way wiring differs significantly between these two models. The Zooz 800 Series Smart On/Off Switch supports direct 3-way, 4-way, and 5-way setups. You can pair it with existing non-dimmer switches in other boxes without rewiring. The Zooz Double Switch Fan Light does not support direct 3-way wiring. It only offers virtual 3-way functionality, which requires specific hub configuration. If you have existing multi-switch arrangements with standard toggle switches, the ZEN76 provides a simpler installation path without needing virtual configurations.
Hub Compatibility
Both devices require a Z-Wave hub and support the 800 Series Long Range protocol. The Zooz 800 Series Smart On/Off Switch works with any hub that supports Z-Wave Long Range. The Zooz Double Switch Fan Light lists specific compatibility with Home Assistant, Hubitat, and SmartThings via a custom driver. It explicitly notes incompatibility with Vivint, ADT Pulse, Ring, and Alarm.com. The ZEN76 has broader general compatibility, while the ZEN30 requires careful checking of your hub’s driver support to ensure full functionality.
Physical Dimensions
Both switches are designed to fit into shallow electrical boxes. The Zooz 800 Series Smart On/Off Switch measures 1.16 inches in depth. The Zooz Double Switch Fan Light measures 1.1 inches in depth. The ZEN30 is slightly shallower, which may help in very tight junction boxes. However, the ZEN30 is physically wider at 4.1 inches compared to a standard single-gauge width. The ZEN76 is a standard single-gauge switch. If your box is extremely shallow, the ZEN30 has a slight edge. If you need a standard width, the ZEN76 is easier to fit.
Load Capacity
The Zooz 800 Series Smart On/Off Switch handles standard lighting loads. Specific wattage limits are not detailed in the provided specifications. The Zooz Double Switch Fan Light has clear load ratings. It supports up to 75 watts of LEDs for the dimming circuit and 15 amps for the fan relay. This 15-amp capacity allows it to handle ceiling fans and exhaust fans reliably. If you are controlling high-capacity loads or multiple fans, the ZEN30 provides explicit ratings that confirm its suitability for heavier electrical demands.
Security Protocol
Both devices utilize the latest Z-Wave security standards. The Zooz 800 Series Smart On/Off Switch features the S2 authenticated security protocol. It also supports SmartStart for secure and instant pairing. The Zooz Double Switch Fan Light also uses the 800 Series Z-Wave Long Range technology. It shares the same security foundation. Both devices are ETL certified for safety compliance. The ZEN76 explicitly highlights the S2 protocol and SmartStart in its features. Both offer robust security, but the ZEN76 provides more specific details on its pairing security features.
Which Zooz Switch Fits Your Needs
You have complex multi-switch wiring setups
The ZEN76 supports physical 3-way, 4-way, and 5-way circuits. You can use it with existing switches without rewiring. This hardware solution works even if line and load are in different boxes. You get a direct mechanical link for reliable control without relying on virtual logic or hub commands for basic toggling.
You need to control a fan and light
The ZEN30 is a double switch designed for fan and light combos. It dims lights up to 75 watts and controls fans up to 15 amps. You get independent control for each load from one device. Note that it offers no speed control for the fan, only on and off via the relay button.
You want physical multi-way control without virtual setups
This model provides true hardware 3-way and 4-way capabilities. You do not need to configure virtual 3-way settings in your hub software. The switch integrates with existing non-dimmer switches in your home. You benefit from a simpler installation process that relies on physical wiring rather than complex network programming for multi-location control.
You need dimming and scene control for lighting
The ZEN30 includes a dimmer for smooth brightness adjustment. You can double-tap for full brightness or adjust ramp rates. It supports scene control via multi-tap triggers on select hubs. You get a single device that handles both lighting dimming and fan power, reducing the number of switches needed in your wall box.
The products compared
Zooz 800 Series Smart On/Off Switch
Best for: Z-Wave Long Range multi-way lighting control
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave, Z-Wave Long Range
- Wiring Requirement
- Neutral required
- Circuit Type
- 3-Way, 4-Way, 5-Way
- Switch Function
- On/Off Switch
View on Amazon: Zooz 800 Series Smart On/Off Switch Affiliate link
The ZOOZ ZEN76 800LR is a white on/off switch built for Z-Wave Long Range networks. It supports 3-way, 4-way, and 5-way setups without extra wiring. The device is only 1.16 inches deep, fitting into shallow boxes. It requires a hub for remote control and voice commands. This switch offers faster communication speeds and includes a built-in range test tool for troubleshooting connectivity issues.
Pros
- Z-Wave Long Range connectivity for extended mesh range
- Supports 3-way, 4-way, and 5-way circuits
- Slim 1.16-inch depth fits shallow electrical boxes
- Built-in range test tool for troubleshooting
- Replaceable paddles available in multiple colors
Cons
- Requires a Z-Wave hub for remote or voice control
- Does not support dimming functionality
- SmartStart pairing requires hub compatibility
Good fit if
- You need reliable Z-Wave Long Range coverage in a large home
- You have existing multi-way switch setups that need simple upgrades
- You have shallow electrical boxes that cannot accommodate bulky devices
Skip if
- You want to control lights directly from a smart speaker without a hub
- You need a dimmer switch for adjustable light levels
- You prefer a toggle-style switch over a paddle design
Verdict: ZOOZ ZEN76 800LR On/Off Switch is ideal for users upgrading to Z-Wave Long Range who need flexible multi-way wiring solutions. It fits best in homes with shallow boxes or complex switch circuits.
Zooz Double Switch Fan and Light Dimmer
Best for: single-gang fan and light combo fixtures
- Smart Home Compatibility
- Home Assistant, Hubitat, SmartThings
- Hub Requirement
- Hub Required
- Connectivity
- 800 Series Z-Wave Long Range
- Wiring Requirement
- NEUTRAL WIRE REQUIRED
- Circuit Type
- Virtual 3-way
- Switch Function
- Dimmer
View on Amazon: Zooz Double Switch Fan and Light Dimmer Affiliate link
This dual-load smart switch fits a single gang box to control a light fixture and a fan independently. It pairs an integrated 75-watt LED dimmer paddle with a separate 15-amp relay button for basic on and off fan operation. It requires a neutral wire and a Z-Wave hub. It suits you if you want independent control over combined ceiling fixtures.
Pros
- Controls two separate loads from a single gang box
- 15A relay supports ceiling and exhaust fans
- 800 Series Z-Wave Long Range connectivity
- Shallow 1.1-inch depth fits crowded electrical boxes
Cons
- Fan relay lacks variable speed control
- LED dimmer load limit capped at 75W
- Does not support direct 3-way traveler wiring
Good fit if
- You have a single gang box controlling both a fan and a light fixture.
- You have a neutral wire available in the switch box.
- You use an open platform like Home Assistant, Hubitat, or SmartThings.
Skip if
- You need multi-speed ceiling fan control.
- You rely on alarm-based Z-Wave hubs such as Ring, Vivint, or ADT.
- You require standard direct 3-way mechanical wiring.
Verdict: Zooz Double Switch Fan and Light Dimmer is built for homeowners needing independent light dimming and fan switching inside a single electrical box on supported Z-Wave networks.
Specifications side by side
| Spec | Zooz 800 Series Smart On/Off Switch | Zooz Double Switch Fan and Light Dimmer |
|---|---|---|
| Smart Home Compatibility | not stated | Home Assistant, Hubitat, SmartThings |
| Hub Requirement | Hub Required | Hub Required |
| Connectivity | Z-Wave, Z-Wave Long Range | 800 Series Z-Wave Long Range |
| Wiring Requirement | Neutral required | NEUTRAL WIRE REQUIRED |
| Circuit Type | 3-Way, 4-Way, 5-Way | Virtual 3-way |
| Switch Function | On/Off Switch | Dimmer |
| Maximum Load | not stated | 75W LED, 15A |
| Color | White | White |
| Model | ZEN76 800LR | ZEN30 800LR |
| Size | not stated | 1.7" x 4.1" x 1.1" |
Frequently asked questions
Does the ZOOZ 800 Series Smart On/Off Switch support dimming?
No, it does not support dimming. This device is a dedicated on/off switch designed for standard lighting circuits that do not require brightness adjustment. You cannot adjust light levels with this specific model. It focuses solely on turning the load on or off.
Can I control my fan and light separately with the ZEN30?
Yes, you can control them independently. The Zooz Double Switch Fan Light ZEN30 offers separate control for both the fan and the light. It provides reliable dimming for the light and relay switching for the fan, allowing you to manage each function distinctly in your smart home setup.
Which Zooz switch is better for multi-way wiring setups?
The ZEN76 is better for complex multi-way wiring. It supports physical 3-way, 4-way, and 5-way circuits. You can use it with existing switches without needing to rewrite your wiring. This makes it ideal for homes with shallow boxes or complex switch circuits that require flexible installation options.
Do both switches require a hub to function?
Yes, both devices require a hub. Each product lists a hub requirement as mandatory for operation. You cannot use either the ZEN76 or the ZEN30 without connecting them to a compatible Z-Wave hub. This hub enables the Z-Wave Long Range protocol for communication with your smart home system.
Is the ZOOZ Double Switch compatible with Home Assistant?
Yes, the ZEN30 is compatible with Home Assistant. The product data lists Home Assistant as a supported smart home platform alongside SmartThings. You can integrate this double switch into your existing Home Assistant ecosystem to manage your fan and light controls through your preferred interface.
What is the physical size of the Zooz Double Switch?
The Zooz Double Switch measures 1.7 inches by 4.1 inches by 1.1 inches. This compact form factor helps it fit into standard electrical boxes. You should verify your box depth before installation to ensure the device fits comfortably alongside your existing wiring and other components.
Does the ZEN76 work with SmartThings?
The provided data does not list SmartThings compatibility for the ZEN76. It only specifies Z-Wave connectivity and hub requirements. While it uses the same protocol as the ZEN30, you should check the manufacturer's official compatibility list for SmartThings support for this specific on/off model before purchasing.