ZOOZ Z-Wave In-Wall Scene Controller vs ZOOZ Z-Wave MultiRelay 3 Dry: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the zooz 800 series z wave long vs z wave long range multirelay. Both devices use the latest 800 series Z-Wave chip for better signal coverage and S2 security. They both require a Z-Wave hub. The main difference is their function. One is a scene controller for lights. The other is a multi-relay for appliances. You need to decide which role fits your system.
Key differences
| Aspect | Zooz Z-Wave In-Wall Scene Controller | Zooz Z-Wave MultiRelay 3 Dry Contact Controller |
|---|---|---|
| Primary Function | Scene controller with 5 buttons | Multi-relay with 3 dry contacts |
| Power Source | 120 V line power | 5V USB-C or 12-24 V AC/DC |
| Wiring Requirement | Neutral wire required | Not listed |
| Color | White | Black |
Which one should you choose?
Choose Zooz Z-Wave In-Wall Scene Controller if
- You want to control lighting scenes from the wall.
- You need a device that replaces a standard light switch.
- You have a neutral wire available in your switch box.
Choose Zooz Z-Wave MultiRelay 3 Dry Contact Controller if
- You need to automate garage doors or sprinklers.
- You want to control multiple devices with one unit.
- You prefer using a USB or low-voltage power source.
Verdict: Choose the Scene Controller if you need physical buttons for lighting control. Choose the MultiRelay if you need to automate external appliances like garage doors or sprinklers. Both offer reliable Z-Wave Long Range connectivity.
Zooz Scene Controller vs MultiRelay Specs
Control functionality
The Zooz Z-Wave In-Wall Scene Controller offers direct control for a single 120 V light fixture, supporting up to 150 W for LED loads. It also includes four remote buttons for wireless scene triggers. In contrast, the Zooz Z-Wave MultiRelay 3 Dry provides three independent dry contact relays. This allows you to control three separate devices, such as garage doors or sprinklers, using one unit. The MultiRelay handles loads up to 20 A at 1-240 V. If you need to manage multiple low-voltage or dry contact devices, the MultiRelay offers more capacity.
Wiring requirements
Installation needs differ significantly between these two devices. The Zooz Z-Wave In-Wall Scene Controller requires a neutral wire for operation. It is designed to fit into standard single-pole or 3-way switch boxes, provided a neutral is present. The Zooz Z-Wave MultiRelay 3 Dry does not use line voltage wiring. Instead, it powers via a 5V USB-C cable or a 12-24 V AC/DC source. You must provide your own power adapter or cable. The MultiRelay is suitable for locations without neutral wires, while the Scene Controller needs that specific wiring infrastructure.
Smart home compatibility
Both devices support major open platforms like Hubitat and Home Assistant. For SmartThings, both require custom drivers to function correctly. The Zooz Z-Wave In-Wall Scene Controller is supported by HomeSeer in addition to the core three. The Zooz Z-Wave MultiRelay 3 Dry has broader partial compatibility with closed systems. It offers R1 control on Ring, Vivint, and Alarm.com panels. However, it does not fully work with Wink. If you use a closed ecosystem like Ring, the MultiRelay provides some level of integration that the Scene Controller lacks.
Connectivity standard
Both units utilize the 800 series Z-Wave chip, ensuring they support Z-Wave Long Range technology for extended coverage and faster communication. They both include S2 authenticated security and SmartStart for easy pairing. There is no difference in their wireless capabilities. Both rely on a Z-Wave hub for connectivity, as smart speakers alone cannot control them. You can expect identical range and mesh network performance from both the Zooz Z-Wave In-Wall Scene Controller and the Zooz Z-Wave MultiRelay 3 Dry regarding signal strength and protocol version.
Physical dimensions
The Zooz Z-Wave In-Wall Scene Controller is designed to fit into standard wall switch boxes. It measures 1.5 inches in width and 4.25 inches in height, with a shallow depth of 1.1 inches. It weighs 5.3 ounces. The Zooz Z-Wave MultiRelay 3 Dry is a separate module with dimensions of 4 inches by 2.5 inches by 1.5 inches. It does not fit into a standard switch box. The Scene Controller is built for direct wall mounting, while the MultiRelay is a compact module intended for installation in an electrical panel or near the controlled device.
Choose the right Zooz device for you
Users automating garage doors or sprinklers
The MultiRelay 3 Dry Contact Controller offers three independent relays for devices like garage doors or irrigation systems. It supports 1-240 V loads up to 20 A and uses USB-C or 12-24 V AC/DC power. This makes it ideal for controlling non-lighting appliances remotely without wiring high voltage directly.
Homeowners wanting direct light and scene control
The Scene Controller connects directly to a 120 V light fixture up to 150 W and includes four programmable remote buttons for one-touch scene activation. It fits in shallow boxes and supports 3-way switching with a neutral wire. This device is best for managing lighting presets and manual wall control.
People needing compact in-wall installation
This unit measures 1.1 inches deep, allowing it to fit into crowded or shallow switch boxes. It replaces standard switches while adding Z-Wave Long Range capabilities. The compact form factor ensures it stays hidden behind your faceplate while providing hub integration and S2 security for your smart lighting network.
The products compared
Zooz Z-Wave In-Wall Scene Controller
Best for: Advanced scene control with Z-Wave Long Range
- Connectivity
- Z-Wave, Z-Wave Long Range
- Smart Home Compatibility
- SmartThings, Hubitat, Home Assistant
- Hub Requirement
- Hub Required
- Dimensions
- 1.75 × 1.5 × 4.25 inches
- Weight
- 5.3 ounces
View on Amazon: Zooz Z-Wave In-Wall Scene Controller Affiliate link
The Zooz ZEN32 800LR is a white Z-Wave scene controller built on the latest 800 series chip. It supports Z-Wave Long Range for better signal coverage and faster communication. The device features one main button for direct light control and four remote buttons for scene triggers. It requires a neutral wire and a Z-Wave hub. This unit suits users needing advanced scene programming with robust mesh and long-range connectivity.
Pros
- Built on the 800 series Z-Wave chip for faster communication
- Supports Z-Wave Long Range technology alongside traditional mesh
- Includes four remote buttons for one-touch scene activation
- Main button controls up to 150 W LED fixtures directly
- Compact design at 1.1 inches deep for shallow switch boxes
Cons
- Requires a Z-Wave hub for operation
- Needs a neutral wire for installation
- Limited hub compatibility excluding many basic systems
Good fit if
- You need Z-Wave Long Range connectivity for better signal coverage
- You want to program multiple scenes with four remote buttons
- You have a compatible hub like SmartThings, Hubitat, or Home Assistant
Skip if
- You do not have a neutral wire available at the switch
- Your hub is not listed in the compatibility section
- You need a device that works without a Z-Wave hub
Verdict: Zooz ZEN32 800LR Scene Controller offers advanced scene control and long-range connectivity for users with compatible hubs and neutral wires. It fits those prioritizing modern Z-Wave 800 series performance over basic switching.
Zooz Z-Wave MultiRelay 3 Dry Contact Controller
Best for: Automating multiple dry contact devices
- Connectivity
- Z-Wave, Z-Wave Long Range
- Smart Home Compatibility
- Hubitat, Home Assistant, SmartThings
- Power Source
- 5V USB-C or 12-24 V AC/DC
- Hub Requirement
- Hub Required
- Application
- Irrigation, Air Conditioners
- Voltage
- 24V
View on Amazon: Zooz Z-Wave MultiRelay 3 Dry Contact Controller Affiliate link
The Zooz ZEN16 is a Z-Wave Long Range device with three independent dry contact relays. It handles 1-240 V loads up to 20 A for items like garage doors or sprinklers. You power it via USB-C or 12-24 V AC/DC. It uses S2 security and SmartStart. This unit suits you if you need to automate multiple low-voltage or dry contact devices from a single hub.
Pros
- Three independent dry contact relays for separate control
- Supports Z-Wave Long Range for extended coverage
- Handles loads up to 20 A at 1-240 V
- Includes S2 security and SmartStart technology
Cons
- Requires a compatible open Z-Wave hub for full functionality
- Power adapter and jumper wires are not included
- Limited control on some alarm panels like Ring or Vivint
Good fit if
- You need to control three separate dry contact devices
- You have a Z-Wave Long Range compatible hub
- You want to automate garage doors or sprinklers
Skip if
- You need direct voltage control without dry contacts
- You prefer a plug-and-play device with no hub
- You want included power accessories for immediate use
Verdict: The Zooz ZEN16 3-Relay Controller offers versatile automation for dry contact devices like garage doors. It fits users with compatible hubs who need independent control over multiple loads.
Specifications side by side
| Spec | Zooz Z-Wave In-Wall Scene Controller | Zooz Z-Wave MultiRelay 3 Dry Contact Controller |
|---|---|---|
| Connectivity | Z-Wave, Z-Wave Long Range | Z-Wave, Z-Wave Long Range |
| Smart Home Compatibility | SmartThings, Hubitat, Home Assistant | Hubitat, Home Assistant, SmartThings |
| Power Source | not stated | 5V USB-C or 12-24 V AC/DC |
| Hub Requirement | Hub Required | Hub Required |
| Application | not stated | Irrigation, Air Conditioners |
| Voltage | not stated | 24V |
| Dimensions | 1.75 × 1.5 × 4.25 inches | not stated |
| Weight | 5.3 ounces | not stated |
| Color | white | Black |
| Model | ZEN32 800LR | ZEN16 |
| Size | not stated | 4" x 2.5" x 1.5" |
Frequently asked questions
Does the Zooz Z-Wave In-Wall Scene Controller support Z-Wave Long Range?
Yes, this model uses the 800 series Z-Wave Long Range technology. It offers extended connectivity for users with compatible hubs. The device is designed for advanced scene control. It prioritizes modern performance over basic switching functions. You need a hub to enable these features.
Can I use the MultiRelay for garage door automation?
Yes, the Zooz Z-Wave MultiRelay 3 Dry Contact Controller is ideal for this task. It provides three independent relays for devices like garage doors. The unit supports 1-240 V loads up to 20 A. It also handles irrigation and air conditioning systems effectively.
What is the physical size of the Zooz ZEN32 Scene Controller?
The Zooz ZEN32 measures 1.5 inches in width, 4.25 inches in height, and 1.75 inches in length. It weighs 5.3 ounces. The device comes in a white finish. These dimensions allow it to fit standard in-wall boxes for installation.
Does the MultiRelay require a neutral wire?
The provided specifications do not mention a neutral wire requirement for the MultiRelay. It is a dry contact controller designed for specific loads. You must ensure your hub is compatible with Z-Wave devices. The unit operates on 24V for its control circuitry.
Is a Z-Wave hub required for both devices?
Yes, a hub is required for both the Scene Controller and the MultiRelay. Neither device operates independently without a central controller. They both utilize the 800 series Z-Wave chip. This ensures secure communication and reliable signal coverage within your smart home network.
What color options are available for the Zooz ZEN16?
The Zooz ZEN16 MultiRelay is available in black. The device measures 4 inches by 2.5 inches by 1.5 inches. This compact form factor helps it fit into various electrical boxes. The dark color may help it blend into darker utility spaces.
How many relays does the MultiRelay 3 Dry offer?
The MultiRelay 3 Dry Contact Controller offers three independent relays. This allows you to control multiple devices separately. You can automate garage doors, sprinklers, or other low-voltage loads. Each relay handles up to 20 A at 1-240 V.
What is the weight of the Zooz ZEN32?
The Zooz ZEN32 In-Wall Scene Controller weighs 5.3 ounces. This lightweight design makes it easy to install in standard wall boxes. The device includes four remote buttons for wireless scene triggers. It is built for users who need precise control over lighting.