New One Zwave Outlet Dimmer 2 Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You might be looking for new one zwave outlet dimmer 2 alternatives if the current option does not fit your specific setup. The New One Z-Wave 800 Series Dimmer Outlet offers strong range extension and secure S2 pairing. It acts as a repeater and supports voice control through compatible hubs. However, you may need a different form factor or connectivity type for your project.
The alternatives in this list were chosen because their specifications overlap with the original product. You can find in-wall relays, different dimmer plugs, or even Zigbee options if your hub supports them. Some picks offer independent fan and light control, while others focus on compact sizing for tight electrical boxes. Each selection matches key requirements like hub compatibility and Z-Wave or Zigbee connectivity. This guide compares these specs to help you find the best fit for your home automation needs.
How these alternatives compare
Zooz 700 Series Z-Wave In-Wall Smart Relay
The Zooz 700 Series Z-Wave In-Wall Smart Relay differs by targeting existing wall switches rather than outlets. You install it behind the switch plate to add automation without replacing hardware. This model supports 3-way configurations, which the New One outlet cannot do. It offers a shallow depth of 0.7 inches, fitting into tight electrical boxes. You get Z-Wave connectivity and SmartThings or Home Assistant compatibility. You give up the dimming capability and the ability to plug devices directly into the unit. This option suits users retrofitting standard switches for voice control and network expansion.
Minoston 800 Series Z-Wave Dimmer Plug
The Minoston 800 Series Z-Wave Dimmer Plug provides a similar dimming function but in a single-pack format. It shares the 800 Series LR standard, offering extended range and repeater capabilities like the New One unit. You can use it with Alexa, SmartThings, and Home Assistant. The dimensions are slightly smaller at 1.18 inches wide and 2.52 inches long. You save space compared to the New One 2-pack but lose the bulk purchase value. This alternative is ideal for users who need to expand their Z-Wave network with dimming in a single location. It offers reliable signal boosting without the complexity of in-wall wiring.
Zooz Double Switch Fan and Light Dimmer
The Zooz Double Switch Fan and Light Dimmer replaces the outlet form factor with an in-wall switch design. It provides independent control for lights and fans, which the New One dimmer plug cannot achieve. This unit features a shallow depth of 1.1 inches, fitting into standard electrical boxes. You get 800LR Z-Wave connectivity for better range and SmartThings or Home Assistant support. You give up the ability to plug in lamps or appliances directly. This option is best for users managing ceiling fans and lighting circuits who need separate dimming and relay control within a robust Z-Wave network.
Enbrighten In-Wall Motion Sensor Smart Switch
The Enbrighten In-Wall Motion Sensor Smart Switch introduces automated lighting based on motion detection, a feature the New One outlet lacks. You install it in place of a standard switch to control indoor lights automatically. It requires a neutral wire and a Z-Wave hub for operation. The unit measures 1.5 inches wide and 3 inches tall. You get network boosting capabilities and customizable motion detection settings. You give up the dimming control and the plug-in convenience of the New One unit. This alternative suits homeowners who want hands-free lighting in rooms like hallways or bathrooms while maintaining a strong Z-Wave signal.
THIRDREALITY Zigbee Smart Plug 4-Pack
The THIRDREALITY Zigbee Smart Plug 4-Pack shifts the protocol from Z-Wave to Zigbee. You get four units in one package, offering more outlets for the same count. It supports SmartThings and Home Assistant integration. The compact size measures 1.3 inches wide and 2.7 inches long. You gain energy monitoring capabilities, which the New One outlet does not list. You lose Z-Wave repeater functionality and compatibility with Z-Wave-only hubs. This option is best for users with existing Zigbee hubs who need multiple monitored outlets for various devices in their smart home setup.
SONOFF Zigbee Mini Smart Switch 2-Pack
The SONOFF Zigbee Mini Smart Switch 2-Pack offers a compact, neutral-wired solution for in-wall installations. It uses Zigbee connectivity, requiring a compatible hub rather than a Z-Wave one. The unit is extremely shallow at 0.66 inches, fitting into tight spaces behind wall plates. You get support for Alexa, Google Home, and SmartThings. You give up the plug-in form factor and Z-Wave network extension benefits. This alternative is ideal for users expanding their Zigbee network with reliable switches. It provides easy integration with major voice assistants for standard lighting control without the bulk of a smart outlet.
Quick picks
Our 7 picks
New One Z-Wave 800 Series Dimmer Outlet
Best for: extending Z-Wave range with secure dimming
- Smart Home Compatibility
- Alexa, Google Assistant
- Hub Requirement
- Z-Wave Hub Required
- Connectivity
- Z-Wave
- Switch Function
- Dimmer Plug
- Maximum Load
- 300W
- Dimensions
- 2.99 × 1.46 × 1.02 inches
View on Amazon: New One Z-Wave 800 Series Dimmer Outlet Affiliate link
This 800 Series Z-Wave dimmer plug extends your network range by up to 1300 feet in open areas. It supports S2 security with unique QR codes for safe pairing. You can adjust brightness via Google Assistant or Alexa. The mini design fits 1.46 inches wide, allowing two units per outlet. It works as a repeater for up to four signal layers. You need a compatible hub like SmartThings or Hubitat to use it.
Pros
- 800 Series LR extends range up to 1300 feet
- S2 Security with unique DSK QR code pairing
- Voice control for dimming via Alexa and Google Assistant
- Acts as a Z-Wave repeater for up to 4 layers
Cons
- Incompatible with Echo Plus and Vivint Hub
- Requires a separate Z-Wave hub to function
- Limited to 300W maximum load capacity
Good fit if
- You need to extend Z-Wave network range
- You want S2 security for device pairing
- You require voice-controlled dimming
Skip if
- You use an Echo Plus or Vivint Hub
- You prefer plug-and-play without a hub
- You need to control loads over 300W
Verdict: New One Z-Wave 800 Series Dimmer Outlet is a strong choice for users needing extended range and secure pairing. It fits homes with compatible hubs that need reliable signal boosting and dimming control.
Zooz 700 Series Z-Wave In-Wall Smart Relay
Best for: retrofitting existing wall switches with automation
- Smart Home Compatibility
- SmartThings, Hubitat, Home Assistant
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave, Z-Wave Long Range
- Wiring Requirement
- Neutral Required
- Circuit Type
- 3-Way
- Switch Function
- On/Off Switch
View on Amazon: Zooz 700 Series Z-Wave In-Wall Smart Relay Affiliate link
The Zooz ZEN51 is a compact smart relay that installs behind existing wall switches. It uses Z-Wave Long Range for reliable connectivity and supports 3-way setups. You need a neutral wire for installation. It works with major hubs like Hubitat and Home Assistant. This device lets you keep your preferred switch style while adding automation. It is ideal for retrofitting older lighting circuits without replacing the switch itself.
Pros
- Z-Wave Long Range connectivity for extended signal reach
- Supports 3-way switch configurations
- Compact size fits in crowded electrical boxes
- Smart Bulb Mode maintains switch functionality
Cons
- Requires a neutral wire for installation
- Only provides on/off control, not dimming
- Must connect to mechanical switches only
Good fit if
- You want to automate existing wall switches without replacing them
- You have a neutral wire available in the switch box
- You need 3-way switching capability
Skip if
- You do not have a neutral wire in the switch box
- You require dimming functionality for lights
- You want a standalone smart plug instead of a relay
Verdict: Zooz ZEN51 Z-Wave Smart Relay is a practical solution for adding automation to existing switches. It suits users who need 3-way support and reliable long-range connectivity.
Minoston 800 Series Z-Wave Dimmer Plug
Best for: Z-Wave network expansion and dimming
- Smart Home Compatibility
- Alexa, Google Assistant, SmartThings
- Hub Requirement
- Z-Wave Hub Required
- Connectivity
- Z-Wave
- Wiring Requirement
- No wiring required
- Switch Function
- Dimmer
- Maximum Load
- 200W Incandescent, 100W CFL/LED
View on Amazon: Minoston 800 Series Z-Wave Dimmer Plug Affiliate link
This Minoston dimmer plug uses Z-Wave 800 Series technology for faster communication and extended range. It supports 1-100% dimming for incandescent and LED bulbs. The compact design allows two units per outlet. It requires a Z-Wave hub for setup and control. You can manage lighting via app or voice commands. It serves as a reliable range extender for your smart home network.
Pros
- Z-Wave 800 Series with S2 security
- 1-100% dimming range for various bulbs
- Compact size fits two per outlet
- Built-in repeater extends network range
Cons
- Requires a separate Z-Wave hub
- Limited to 200W incandescent load
- No energy monitoring feature listed
Good fit if
- You need Z-Wave dimming control
- You want to extend your mesh network
- You prefer compact plug-in devices
Skip if
- You only have a Zigbee ecosystem
- You require direct Wi-Fi connectivity
- You need energy usage tracking
Verdict: Minoston 800 Series Z-Wave Dimmer Plug is a solid choice for users expanding their Z-Wave network. It fits well in homes needing reliable dimming without wiring complexity.
Zooz Double Switch Fan and Light Dimmer
Best for: independent light and fan control
- Smart Home Compatibility
- Home Assistant, Hubitat, SmartThings
- Hub Requirement
- Hub Required
- Connectivity
- 800 Series Z-Wave Long Range
- Wiring Requirement
- NEUTRAL WIRE REQUIRED
- Circuit Type
- Virtual 3-way
- Switch Function
- Dimmer
View on Amazon: Zooz Double Switch Fan and Light Dimmer Affiliate link
The Zooz ZEN30 is a white double switch with Z-Wave Long Range connectivity. It dims lights up to 75 watts and controls fans up to 15 amps. You need a compatible Z-Wave hub and a neutral wire for installation. Its shallow 1.1-inch depth fits crowded boxes. This unit suits users who want independent control of two loads from one device.
Pros
- 800 Series Z-Wave Long Range connectivity
- Dims LED bulbs up to 75 watts
- Relay controls loads up to 15 amps
- Shallow 1.1-inch depth for tight boxes
Cons
- No direct 3-way wiring support
- No fan speed control
- Requires a compatible Z-Wave hub
Good fit if
- You need to control a light and a fan separately
- You have a Z-Wave hub that supports Long Range
- You have a neutral wire available
Skip if
- You want direct 3-way wiring options
- You need fan speed control
- You do not have a Z-Wave hub
Verdict: Zooz ZEN30 Double Switch offers separate dimming and relay control in a shallow form factor. It fits your needs if you require independent load management and a robust Z-Wave network.
Enbrighten In-Wall Motion Sensor Smart Switch
Best for: Automated indoor lighting with motion detection
- Smart Home Compatibility
- Alexa, SmartThings, Wink
- Hub Requirement
- Hub Required
- Connectivity
- Z-Wave
- Wiring Requirement
- Neutral Required
- Circuit Type
- Single Pole, Multi-Switch
- Switch Function
- Motion Sensor, On/Off Switch
View on Amazon: Enbrighten In-Wall Motion Sensor Smart Switch Affiliate link
This Enbrighten switch combines on/off control with a built-in motion sensor for indoor use. It supports Z-Wave connectivity and requires a hub and neutral wire for installation. You can customize occupancy or vacancy modes, adjust sensitivity, and set timeouts from 5 seconds to 30 minutes. It includes white and almond buttons and acts as a range extender. It is suitable for homes needing automated lighting control without manual switching.
Pros
- Supports occupancy, vacancy, and manual operation modes
- Includes adjustable motion sensitivity and 5 time-out options
- Functions as a Z-Wave range extender up to 150ft
- Comes with interchangeable white and light almond buttons
Cons
- Requires a Z-Wave hub for operation
- Needs a neutral wire for installation
- Only supports single-pole or multi-switch setups with add-on units
Good fit if
- You want automatic lighting control based on motion
- You need a switch that extends your Z-Wave network range
- You have a neutral wire available in your switch box
Skip if
- You do not have a Z-Wave hub
- Your switch box lacks a neutral wire
- You need a switch for outdoor use
Verdict: Enbrighten Z-Wave Motion Sensor Light Switch is ideal for homeowners who want automated lighting with network boosting capabilities. It fits users who have neutral wires and hubs, offering customizable motion detection for indoor rooms.
THIRDREALITY Zigbee Smart Plug 4-Pack
Best for: Existing ZigBee hub users needing energy monitoring
- Smart Home Compatibility
- Home Assistant, SmartThings, Alexa
- Hub Requirement
- Zigbee Hub Required
- Connectivity
- Zigbee 3.0
- Maximum Load
- 15A
- Dimensions
- 2.7 × 1.3 × 1.13 inches
View on Amazon: THIRDREALITY Zigbee Smart Plug 4-Pack Affiliate link
This 4-pack of ZigBee 3.0 smart plugs offers 15A capacity and real-time energy monitoring. You need a compatible hub like Home Assistant, SmartThings, or a Third Reality hub to use these features. The compact design fits most outlets without blocking adjacent sockets. It supports voice control via Alexa and includes safety settings for power restoration. This bundle is ideal for users who want to monitor multiple devices simultaneously.
Pros
- ZigBee 3.0 connectivity for stable hub communication
- Real-time energy monitoring on supported hubs
- 15A maximum load capacity
- Space-saving design avoids blocking adjacent outlets
- 4-pack value for whole-home automation
Cons
- Requires a separate ZigBee hub to function
- Energy monitoring limited to specific hub platforms
- No native Wi-Fi or Bluetooth connection
Good fit if
- You already use a ZigBee hub like Home Assistant or SmartThings
- You want to monitor energy usage for multiple devices
- You need a compact plug that does not block adjacent outlets
Skip if
- You do not have a ZigBee hub and want plug-and-play Wi-Fi
- You need energy monitoring on all smart home platforms
- You prefer a single plug over a multi-pack
Verdict: THIRDREALITY ZigBee Smart Plug 4 Pack suits users with existing ZigBee hubs who want energy monitoring and a compact form factor for multiple outlets.
SONOFF Zigbee Mini Smart Switch 2-Pack
Best for: expanding ZigBee networks in existing wiring
- Smart Home Compatibility
- Alexa, Google Home, SmartThings
- Hub Requirement
- Zigbee 3.0 Gateway Hub Required
- Connectivity
- Zigbee 3.0
- Wiring Requirement
- Neutral Required
- Maximum Load
- 10A
- Dimensions
- 0.66 × 1.3 × 1.56 inches
View on Amazon: SONOFF Zigbee Mini Smart Switch 2-Pack Affiliate link
This SONOFF ZBMINIR2 is a compact ZigBee 3.0 smart switch designed for in-wall installation. It supports a maximum load of 10A and requires a neutral wire and a ZigBee gateway hub. The device integrates with Alexa, Google Home, and SmartThings for voice control. Its small footprint fits standard mounting boxes, making it suitable for expanding your smart home network with up to 64 devices. It is ideal for users already using a ZigBee hub who need reliable, neutral-wired switch control.
Pros
- Uses ZigBee 3.0 protocol for reliable network integration
- Compatible with Alexa, Google Home, and SmartThings
- Compact size fits most standard mounting boxes
- Supports up to 64 Zigbee devices for network expansion
- V-0 PC housing provides fire protection
Cons
- Requires a neutral wire for installation
- Needs a separate ZigBee gateway hub to function
- Limited to 10A maximum load capacity
Good fit if
- You already have a ZigBee hub in your home
- You need a compact switch for tight electrical boxes
- You want voice control via Google Home or Alexa
Skip if
- You do not have a neutral wire in your switch box
- You want to control lights without a central hub
- You need a device that supports Z-Wave instead of ZigBee
Verdict: SONOFF ZBMINIR2 ZigBee Mini Smart Switch is a practical choice for existing ZigBee users who need a neutral-wired, compact switch. It fits well in standard boxes and integrates easily with major voice assistants, though it cannot operate without a hub.
Specifications side by side
| Spec | New One Z-Wave 800 Series Dimmer Outlet | Zooz 700 Series Z-Wave In-Wall Smart Relay | Minoston 800 Series Z-Wave Dimmer Plug | Zooz Double Switch Fan and Light Dimmer | Enbrighten In-Wall Motion Sensor Smart Switch | THIRDREALITY Zigbee Smart Plug 4-Pack | SONOFF Zigbee Mini Smart Switch 2-Pack |
|---|---|---|---|---|---|---|---|
| Smart Home Compatibility | Alexa, Google Assistant | SmartThings, Hubitat, Home Assistant | Alexa, Google Assistant, SmartThings | Home Assistant, Hubitat, SmartThings | Alexa, SmartThings, Wink | Home Assistant, SmartThings, Alexa | Alexa, Google Home, SmartThings |
| Hub Requirement | Z-Wave Hub Required | Hub Required | Z-Wave Hub Required | Hub Required | Hub Required | Zigbee Hub Required | Zigbee 3.0 Gateway Hub Required |
| Connectivity | Z-Wave | Z-Wave, Z-Wave Long Range | Z-Wave | 800 Series Z-Wave Long Range | Z-Wave | Zigbee 3.0 | Zigbee 3.0 |
| Wiring Requirement | not stated | Neutral Required | No wiring required | NEUTRAL WIRE REQUIRED | Neutral Required | not stated | Neutral Required |
| Circuit Type | not stated | 3-Way | not stated | Virtual 3-way | Single Pole, Multi-Switch | not stated | not stated |
| Switch Function | Dimmer Plug | On/Off Switch | Dimmer | Dimmer | Motion Sensor, On/Off Switch | not stated | not stated |
| Maximum Load | 300W | not stated | 200W Incandescent, 100W CFL/LED | 75W LED, 15A | not stated | 15A | 10A |
| Operating Environment | not stated | not stated | not stated | not stated | Indoor | not stated | not stated |
| Dimensions | 2.99 × 1.46 × 1.02 inches | 1.5 × 1.4 × 0.7 inches | 2.52 × 1.18 × 1.46 inches | not stated | 1.5 × 1.5 × 3 inches | 2.7 × 1.3 × 1.13 inches | 0.66 × 1.3 × 1.56 inches |
| Weight | 4.64 ounces | not stated | 2.08 ounces | not stated | 6.4 ounces | not stated | not stated |
| Size | Mini Outlet 2 Pack | not stated | 1Pack | 1.7" x 4.1" x 1.1" | 1 Pack | not stated | ef of 2 pk |
| Model | not stated | ZEN51 | MP31ZD | ZEN30 800LR | 26931 | 3RSP02028BZ | ZBMINIR2-2PACK |
| Color | not stated | not stated | White | White | White & Light Almond | White | not stated |
Frequently asked questions
Can I use these alternatives without a smart hub?
No. All listed options require a compatible hub to function. The New One Z-Wave Outlet, Zooz relays, and SONOFF switches all list hub requirement as mandatory. You cannot control them directly via Wi-Fi or Bluetooth alone. Ensure your central controller supports Z-Wave or Zigbee protocols before purchasing.
Which device works best with Home Assistant?
The Zooz 700 Series Relay, Minoston Dimmer Plug, Zooz Double Switch, and THIRDREALITY Plug all support Home Assistant. These devices offer broad compatibility for open-source automation platforms. You can integrate them directly into your existing Home Assistant instance for reliable control and automation scripting without proprietary cloud dependencies.
Do any of these support 3-way switching?
Yes. The Zooz 700 Series Z-Wave In-Wall Smart Relay supports 3-way configurations. This allows you to control the same load from multiple locations. Other options like the New One Outlet or Minoston Plug are single-gang devices and do not natively support 3-way wiring setups without additional hardware.
Can I control lights and a fan separately with one switch?
Yes. The Zooz Double Switch Fan and Light Dimmer provides independent control for both loads. It features separate dimming and relay outputs. This is ideal for ceiling fans with lights. Other listed devices, such as the New One Outlet, control a single load type and cannot manage separate fan and light circuits.
Which option includes motion detection for indoor use?
The Enbrighten In-Wall Motion Sensor Smart Switch includes built-in motion detection. It is designed for indoor environments and automates lighting based on presence. This device combines a Z-Wave repeater with sensor functionality. Other listed dimmers and plugs require separate motion sensors to achieve similar automated lighting triggers.
Are there compact options for tight electrical boxes?
Yes. The SONOFF Zigbee Mini Smart Switch and Zooz 700 Series Relay offer compact form factors. The SONOFF unit measures 0.66 inches in length, fitting into shallow standard boxes. The Zooz Relay is also small at 0.7 inches high. These sizes help when space behind the wall plate is limited.
Do I need to worry about neutral wires?
Most listed devices require a neutral wire for stable operation. The SONOFF Zigbee Mini Smart Switch and Zooz relays typically need this connection. Always check your electrical box wiring before installation. Devices like the New One Outlet also rely on standard wiring configurations. Verify your home’s wiring supports these requirements.