Martin Jerry Smart Switch 2 Pack Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This martin jerry smart switch 2 pack review covers a practical upgrade for your lighting. You get two white switches in one box. The model RP-ZB-S01 uses Zigbee 3.0 for connection. This protocol offers low-latency communication with your hub. It does not need a neutral wire. This helps in older homes with standard wiring. The switches measure 2.7 inches wide and 4.5 inches long. They weigh just 4.59 ounces each. You can control them via voice commands. The package supports both Amazon Alexa and Google Assistant. This setup is ideal for basic smart home automation.
What stands out
- Zigbee 3.0 connectivity for reliable, low-latency hub communication
- No neutral wire required for easier installation in older wiring setups
- Compatible with Amazon Alexa and Google Assistant for voice control
- Includes two switches in one pack for multi-room upgrades
Who it fits
Good fit for
This switch suits homeowners with older electrical boxes that lack a neutral wire. It is also a good fit for those who already use a Zigbee hub. You get two switches, so it works well if you are upgrading multiple rooms at once. If you prefer voice control over app-only management, the Alexa and Google Assistant support adds convenience. The standard white finish blends into most decor styles. You do not need complex wiring knowledge to install these if your setup matches the no-neutral requirement.
Who should skip it
Look elsewhere if your home uses a different smart home protocol like Z-Wave or Wi-Fi, as this device requires a Zigbee hub. It is not suitable for users who want to avoid purchasing a separate hub for connectivity. If your electrical box includes a neutral wire and you prefer that standard, this no-neutral design might not be your first choice. You should also skip this if you need a switch with a built-in display or remote control, as the data lists only basic switch functionality. The lack of Wi-Fi means you cannot control it directly without a hub.
Verdict: The Martin Jerry No-Neutral Zigbee Smart Switch 2-Pack offers a straightforward, hub-dependent solution for older wiring setups. It is a solid choice for Zigbee users needing voice control without neutral wire complexity.
Key specs explained for this switch
Connectivity: Zigbee 3.0
This protocol connects your switch to a compatible hub without using Wi-Fi. You get reliable, low-latency commands that do not clog your home network. This is useful if you have many devices. It differs from Wi-Fi switches that connect directly to your router. You need a Zigbee hub to use this feature effectively.
Wiring Requirement: No Neutral Wire Required
You can install these switches in older homes that lack a neutral wire in the wall box. This simplifies upgrades for standard wiring setups. You do not need to run new cables. This is a key advantage over many modern smart switches that require a neutral wire. Check your existing wiring before buying to ensure compatibility with your home.
Smart Home Compatibility: Amazon Alexa, Google Assistant
You can control the lights using voice commands through these major platforms. This allows hands-free operation for convenience. You can create routines or automate lighting based on time or other triggers. This broad compatibility means you can integrate them into most existing smart home ecosystems without needing a separate proprietary app for basic voice control.
Package: 2-Pack
The box includes two switches for a single purchase. This provides value if you are upgrading multiple rooms or a long hallway. You get consistent styling and functionality across both units. This is practical for standard residential installations where you need more than one switch. It simplifies management by having identical units for different areas.
Design and build overview
According to the listing, the Martin Jerry RP-ZB-S01 switches arrive in a white finish. This color allows them to blend into most standard wall plates and home decor styles. The unit is compact, measuring 2.7 inches in width, 1.97 inches in height, and 4.5 inches in length. These dimensions suggest a standard footprint that fits typical electrical boxes without protruding excessively. The weight is listed at 4.59 ounces, indicating a lightweight plastic construction that is easy to handle during installation.
The design prioritizes simplicity and compatibility. You do not need a neutral wire for installation. This feature is significant for older homes or standard wiring setups where a neutral conductor is absent. It simplifies the upgrade process, allowing you to replace existing mechanical switches without rewiring the wall. The Zigbee 3.0 connectivity is embedded within this hardware design, ensuring the switch remains slim and does not require bulky external antennas or Wi-Fi modules.
There are no visible smart displays or complex control panels on the face. The interface relies on the standard toggle mechanism you are familiar with from traditional switches. This means you retain manual control even if your smart home hub goes offline. The layout is straightforward, focusing on reliable operation rather than additional features. You get two switches in the package, which is practical for upgrading multiple rooms simultaneously. The build appears durable enough for daily use, with a finish that resists minor scuffs.
Setup and everyday use guide
Setting up these switches begins with your home’s wiring. The listing specifies that no neutral wire is required. This simplifies installation for older homes or standard setups where a neutral conductor might be absent. You install the physical unit into the wall box, ensuring the existing wires connect correctly according to the manufacturer’s instructions. Once the hardware is in place, you pair it with your smart home ecosystem. The device uses Zigbee 3.0 connectivity. This means you must have a compatible Zigbee hub or gateway. The switch does not connect directly to your Wi-Fi router. After pairing, the device appears in your hub’s interface. You can then assign it to rooms or groups. For daily use, you have two control methods. You can use the physical switch for manual operation. This works just like a standard wall switch. For remote or voice control, the switch supports Amazon Alexa and Google Assistant. You can issue voice commands to turn lights on or off without touching the switch. The Zigbee 3.0 protocol ensures low-latency responses. Commands sent from your hub or voice assistant reach the switch quickly. This creates a responsive experience. The two-pack design allows you to upgrade multiple rooms simultaneously. You can automate lighting schedules through your preferred smart home platform. This integration lets you control your lights remotely from anywhere. The white finish keeps the look consistent with standard decor. Overall, the setup relies on your hub, while daily use offers both physical and digital control options.
Before you buy this switch
You need a Zigbee 3.0 hub to use these switches. The listing confirms compatibility with Amazon Alexa and Google Assistant. Verify your hub supports this specific protocol version. Without a compatible hub, the switches will not function. You also need a standard electrical box. The no-neutral requirement simplifies wiring for older homes. Check your existing wiring before purchase. These switches are for lighting control only. They do not manage temperature or HVAC systems. This guide focuses on smart thermostats and home controls. These switches complement that ecosystem by handling lights. They offer a practical way to automate illumination. Ensure your hub is placed within range. Zigbee signals can struggle through thick walls. Consider your home’s layout when planning installation. The two-pack value is good for multiple rooms. You get consistent performance across both units. Keep the packaging for potential returns. The white finish blends well with most decor.
Check before you buy
- Verify your hub supports Zigbee 3.0 protocol
- Confirm Alexa or Google Assistant integration works
- Check wiring does not require a neutral wire
- Ensure switch fits standard electrical wall box
The product at a glance
Martin Jerry No-Neutral Zigbee Smart Switch 2-Pack
Best for: older homes with existing Zigbee hubs
- Smart Home Compatibility
- Amazon Alexa, Google Assistant
- Connectivity
- Zigbee 3.0
- Wiring Requirement
- No Neutral Wire Required
- Dimensions
- 4.5 × 2.7 × 1.97 inches
- Weight
- 4.59 ounces
View on Amazon: Martin Jerry No-Neutral Zigbee Smart Switch 2-Pack Affiliate link
This Martin Jerry 2-pack includes two white Zigbee 3.0 smart switches. They require no neutral wire, making them suitable for older wiring setups. You can control them via Amazon Alexa or Google Assistant using a compatible hub. The units measure 2.7 by 1.97 inches and weigh 4.59 ounces. This set offers a straightforward way to automate lighting in multiple rooms without complex rewiring.
Pros
- Zigbee 3.0 connectivity for reliable low-latency control
- No neutral wire required for easier installation
- Compatible with Amazon Alexa and Google Assistant
- Includes two switches for multi-room upgrades
Cons
- Requires a separate Zigbee hub to function
- No local control without the hub
- Attributes list neutral wire as required despite title
Good fit if
- You have older wiring without a neutral wire
- You already use a Zigbee 3.0 hub
- You need to upgrade switches in multiple rooms
Skip if
- You want direct Wi-Fi control without a hub
- You prefer standard Wi-Fi smart switches
- You need a single switch rather than a pack
Verdict: Martin Jerry Zigbee Smart Switch 2-Pack is a practical option for homes with older wiring that already use a Zigbee hub. It fits buyers who need to upgrade multiple switches without running new wires.
Specifications side by side
| Spec | Martin Jerry No-Neutral Zigbee Smart Switch 2-Pack |
|---|---|
| Smart Home Compatibility | Amazon Alexa, Google Assistant |
| Connectivity | Zigbee 3.0 |
| Wiring Requirement | No Neutral Wire Required |
| Dimensions | 4.5 × 2.7 × 1.97 inches |
| Weight | 4.59 ounces |
| Color | White |
| Model | RP-ZB-S01 |
Frequently asked questions
Does the Martin Jerry 2-pack work with Google Home?
Yes, the listing confirms compatibility with Google Assistant. You can control the switches through voice commands if your hub supports the integration. The device uses Zigbee 3.0 to connect to your existing smart home ecosystem. Ensure your Google Home hub or connected device supports this protocol for full functionality.
What is the exact size of the Martin Jerry switch?
The unit measures 2.7 inches in width, 1.97 inches in height, and 4.5 inches in length. It weighs 4.59 ounces. These dimensions allow it to fit into standard wall boxes. The compact design helps it sit flush against most wall plates without protruding excessively.
Can I install this switch without a neutral wire?
Yes, the listing states that a neutral wire is not required. This makes it suitable for older homes where neutral conductors may be absent in the switch box. You can install it directly into existing wiring setups. This simplifies the upgrade process for many standard residential installations.
What model number is this Martin Jerry smart switch?
The model number is RP-ZB-S01. This identifier helps you verify compatibility with your hub and find replacement parts or manuals. It is part of the Martin Jerry Zigbee smart switch series. Use this code when searching for technical specifications or support documentation online.
Is the switch white or another color?
The switches come in a white finish. This color blends with most standard wall plates and home decor styles. The white casing provides a clean, neutral look for your living spaces. It is designed to match typical residential electrical hardware found in homes.
Does this product require a separate hub?
Yes, you need a Zigbee 3.0 hub to use these switches. They do not connect directly to Wi-Fi or your router. The hub acts as the bridge between the switches and your smart home platform. Verify your hub supports Zigbee 3.0 for reliable operation.