Lutron Claro Smart Accessory Switch Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This lutron claro smart accessory switch review focuses on a wired add-on for multi-location control. It is not a standalone device. You must pair it with a Diva smart dimmer or Claro smart switch to function. The unit supports 3-way circuits, allowing you to control lighting from multiple points in a room. It also works in older homes because it does not require a neutral wire. This accessory expands your control options while maintaining a consistent aesthetic with your main smart switch.
What stands out
- Supports 3-way and multi-location setups with up to 10 accessory switches
- No neutral wire required for installation in existing wiring
- Compatible with Diva smart dimmer and Claro smart switch
- Includes specific tap and hold gestures for preset light levels
- Available in multiple colors including White, Black, and Gray
Who it fits
Good fit for
This switch fits homeowners who already own a Diva smart dimmer or Claro smart switch and need additional control points. It is ideal for hallways, staircases, or large rooms where you want to operate lights from multiple locations. If you have an older home without neutral wires, this accessory works with your existing setup. You also get smart features like scheduling and scenes by adding a Lutron hub. It is a practical solution for extending smart control without rewiring.
Who should skip it
You should skip this product if you need a standalone switch. The data clearly states it is not for standalone use. It requires a compatible main smart switch to function. It also does not work with original Caseta dimmers or switches. If you do not already have a Diva or Claro smart switch, this accessory will not work for you. You must purchase the main switch and a smart hub separately to get full functionality.
Verdict: This accessory is a practical choice for expanding control in homes with existing Diva or Claro smart switches. It is not suitable for standalone use or older Caseta systems.
Key specs for this switch
Circuit Type: 3-Way, Multi-Location
This spec means the device controls a single light from two or more locations. You can install up to ten accessory switches in one circuit. This setup replaces traditional 3-way wiring. It is ideal for hallways or staircases. Compare this to standard single-pole switches that only work from one spot. Multi-location control adds convenience without complex rewiring.
Hub Requirement: Smart hub sold separately
You cannot use this switch alone. It requires a separate Lutron smart hub to connect to Wi-Fi and your app. Without the hub, the device does not offer remote control or voice assistant integration. This adds to your initial setup cost and complexity. When shopping, check if your current hub supports this specific accessory type to avoid extra purchases.
Switch Function: On/Off
The accessory switch toggles the connected smart dimmer or switch between on and off states. It does not adjust brightness levels directly. Instead, it sends commands to the main smart switch. This simplifies the interface for users who prefer simple toggles over sliders. It ensures consistent on/off behavior across multiple locations in your home.
Wiring Requirement: Does not require a neutral wire
This feature allows installation in older homes where neutral wires are often missing in switch boxes. It simplifies the upgrade process for vintage properties. You do not need to run new wires to make it work. This makes it a practical choice for retrofitting existing infrastructure. Always verify your specific box has the necessary hot and traveler wires for proper operation.
Design and Build Quality
The listing describes the Claro Smart Accessory Switch as a white plastic unit designed to match the Diva smart dimmer and Claro smart switch. You get two switches per pack, allowing you to coordinate multiple locations with a consistent aesthetic. The finish is smooth and matte, which blends into most residential wallplates. According to the listing, the switch measures 2.94 inches in width and 4.69 inches in height. These dimensions fit standard US electrical boxes without requiring special adapters. The depth is 1.44 inches, ensuring it sits flush behind most coordinating wallplates. The pack weighs 4.8 ounces total, making installation straightforward for most DIYers. The layout is simple, with a single rocker-style control. You do not get a display or buttons for complex settings. This minimalist design prioritizes clean lines over extra features. You can choose from other colors like black, gray, or ivory if white does not fit your decor. The switch relies on wired connections and does not need a neutral wire. This makes it suitable for older homes where wiring may be limited. The plastic construction is durable enough for daily use but does not offer premium metal finishes. You get a practical, no-frills device that focuses on function. The matching style ensures your smart switches look unified throughout your home. This consistency matters if you value a tidy, professional appearance in your control centers.
Setup and Everyday Use
Setup requires pairing this accessory with a compatible main switch. You cannot use it alone. It works only with the Diva smart dimmer or Claro smart switch. The listing notes it does not work with original Caseta dimmers or switches. You must also buy a smart hub separately. Adding the hub enables voice control and app management. You can create scenes and schedules through the free Lutron app. The device fits standard wall boxes. Its dimensions are 2.94 inches wide and 4.69 inches tall. It weighs 4.8 ounces. You do not need a neutral wire for installation. This makes it suitable for older homes with existing wiring. Daily use involves simple interactions. With the Diva smart dimmer, a single tap sets a preset light level. A double tap turns the lights fully on. Pressing and hold fades the lights off slowly. You can install up to ten accessory switches in one circuit. This allows control from multiple locations. The switch handles only on and off functions. It does not dim light on its own. The white plastic finish matches the Diva and Claro series. You should buy a coordinating wallplate separately. The pack includes two switches. This helps maintain a consistent look across different rooms. You control the lights remotely via the app or voice assistant once the hub is active. The system relies on the main switch for power and logic. The accessory simply sends commands. This setup is practical for hallways or stairs where you need control from both ends.
Check Compatibility Before Buying
You must verify your existing hardware before purchasing this accessory. It does not function as a standalone switch. You need a compatible Diva smart dimmer or Claro smart switch to control the circuit. The listing explicitly states it is not for standalone use. You also need a smart hub, sold separately, to enable voice control and app automation. Check your wiring. This device does not require a neutral wire, making it suitable for older homes. However, it is incompatible with original Caseta dimmers or switches. If you already own those older models, this accessory will not work for you. You must buy a coordinating wallplate separately. This unit fits into the broader Lutron ecosystem rather than standing alone. It adds multi-location control to your existing smart lighting setup. Ensure your main switch is the correct model. The Claro or Diva series is required. Without these specific components, the accessory switch remains inactive. Plan your installation around these compatibility constraints to avoid wasted effort and incompatible hardware.
Check before you buy
- Confirm you have a Diva smart dimmer or Claro smart switch
- Verify you do not have original Caseta dimmers or switches
- Ensure you have a separate smart hub for app control
- Check that your home wiring does not require a neutral wire
The product at a glance
Lutron Claro Smart Accessory Switch (2-Pack)
Best for: Existing Lutron smart switch 3-way setups
- Hub Requirement
- Smart hub sold separately
- Wiring Requirement
- Does not require a neutral wire
- Circuit Type
- 3-Way, Multi-Location
- Switch Function
- On/Off
- Dimensions
- 1.44 × 2.94 × 4.69 inches
- Weight
- 4.8 ounces
View on Amazon: Lutron Claro Smart Accessory Switch (2-Pack) Affiliate link
This Lutron Claro accessory switch enables 3-way control for smart dimmers or switches. It requires a separate smart hub and compatible main switch, as it is not for standalone use. The device works with existing wiring without a neutral wire. You get two white switches in this pack. It supports multi-location setups with up to ten accessory switches. This option suits homes needing coordinated smart lighting control without rewiring.
Pros
- Supports 3-way and multi-location configurations
- No neutral wire required for installation
- Compatible with Diva and Claro smart switches
- Allows up to 10 accessory switches per circuit
Cons
- Requires a separate smart hub for operation
- Cannot function as a standalone switch
- Incompatible with original Caseta dimmers or switches
Good fit if
- You want to add smart control to existing 3-way setups
- You already own a compatible Lutron smart switch
- Your home wiring lacks a neutral wire
Skip if
- You need a switch that works without a hub
- You plan to use it as a primary standalone switch
- You have original Caseta PD-6WCL or PD-5ANS switches
Verdict: Lutron Claro Accessory Switch 3-Way White 2-Pack is a specialized add-on for users who already have a compatible Lutron smart switch and need additional control points. It fits homes with older wiring but offers no value if you require a standalone smart switch.
Specifications side by side
| Spec | Lutron Claro Smart Accessory Switch (2-Pack) |
|---|---|
| Hub Requirement | Smart hub sold separately |
| Wiring Requirement | Does not require a neutral wire |
| Circuit Type | 3-Way, Multi-Location |
| Switch Function | On/Off |
| Dimensions | 1.44 × 2.94 × 4.69 inches |
| Weight | 4.8 ounces |
| Size | Pack of 2 |
| Color | White |
| Model | DVRF-AS-WH |
Frequently asked questions
Can I use the Lutron Claro Smart Accessory Switch as a standalone smart switch?
No, this device cannot function on its own. It is a specialized add-on designed strictly for multi-location control. You must pair it with a compatible main switch, such as a Diva smart dimmer or a Claro smart switch, to operate any lighting circuit. Without that primary device, the accessory switch has no power or function.
Does this switch work with original Caseta dimmers or switches?
No, the listing explicitly states it does not work with original Caseta dimmers or switches. You need a Diva smart dimmer or a Claro smart switch to make this accessory functional. Verify your existing hardware before purchasing, as compatibility is limited to specific Lutron smart switch models.
How many accessory switches can I install in one circuit?
You can install up to ten accessory switches in a single circuit. This spec allows you to control a single light from multiple locations throughout your home. This setup is ideal for hallways, large rooms, or stairwells where you need convenient access points without traditional complex wiring.
What is the model number for the Lutron Claro Smart Accessory Switch?
The model number is DVRF-AS-WH. This identifier helps you verify you are purchasing the correct white 2-pack accessory switch. It ensures compatibility with your existing Lutron smart switch infrastructure. Check this number when ordering to avoid receiving incompatible hardware for your specific lighting setup.
What are the physical dimensions of the switch?
The switch measures 2.94 inches in width, 4.69 inches in height, and 1.44 inches in length. It weighs 4.8 ounces. These dimensions allow it to fit standard wall boxes. The white plastic design matches the Diva smart dimmer and Claro smart switch for a consistent aesthetic in your home.
Is this switch suitable for homes with older wiring?
Yes, it fits homes with older wiring. The device supports 3-way circuits, which replaces the need for traditional 3-way wiring methods. This makes it a practical upgrade for older homes where installing new wires between switch locations is difficult or costly. It simplifies multi-location control significantly.
What color options are available for this accessory switch?
The listing describes this unit as white. It is sold as a white plastic unit designed to match the Diva smart dimmer and Claro smart switch. You receive two switches per pack. This color choice allows you to coordinate multiple locations with a consistent and clean aesthetic.