Leviton SureSlide LED Dimmer Switch Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This leviton sureslide LED advanced dimmer review covers the R08-66741-00T model. It is a single-pole dimmer switch designed for 150W of LED, halogen, or incandescent loads. The device features an ultra-slim profile that fits standard wall boxes without needing a neutral wire. You get smooth, flicker-free control over your lighting. The switch supports 3-way and 4-way wiring setups for multi-location use. It allows you to customize minimum brightness and fade rates. This guide explains how these specs affect your installation and daily use.
What stands out
- Supports up to 150W for LED, halogen, and incandescent bulbs
- Requires no neutral wire for easier installation
- Compatible with 3-way and 4-way wiring setups
- Allows customization of minimum brightness and fade rates
- Available in five colors including white, black, and light almond
Who it fits
Good fit for
You should choose this dimmer if you are replacing a standard switch in a home with existing wiring that lacks a neutral wire. It suits users who want to control 150W of LED or halogen lights from multiple locations. The customizable fade and brightness settings help you fine-tune the atmosphere. It works well for overhead lights in living rooms or bedrooms where you need smooth dimming without flicker.
Who should skip it
Skip this model if you have high-wattage resistive loads exceeding 150W. It is not suitable for smart home automation since it lacks Wi-Fi or Bluetooth connectivity. You cannot control it remotely via an app. If you need voice control or scheduling features, look for a smart dimmer instead. This is a manual wall switch only, designed for local physical control rather than integrated digital home systems.
Verdict: This dimmer offers reliable, flicker-free control for standard lighting circuits. It is a practical choice for users who need a slim, neutral-free switch with multi-location support.
Key specs explained for Leviton
Maximum Load: 150W LED, Halogen, Incandescent
This limit defines the total wattage of bulbs you can connect to the switch. You must ensure your combined bulb wattage does not exceed 150 watts. Exceeding this limit can cause the dimmer to overheat or fail. This specification is critical when upgrading to high-efficiency LED fixtures, as you must sum the actual wattage of each bulb rather than counting them individually.
Wiring Requirement: No Neutral Required
The switch connects directly to the hot and load wires without needing a neutral wire in the wall box. This feature simplifies installation in older homes where neutral wires are often absent. You can replace traditional mechanical dimmers without rewiring the junction box. This makes it a practical choice for retrofitting existing lighting circuits during home upgrades or maintenance projects.
Circuit Type: 3-Way, 4-Way
This indicates the switch supports multi-location control setups. You can pair it with other compatible switches to control the same light from multiple points, such as at the top and bottom of a staircase. This eliminates the need for complex wiring modifications. It provides flexibility for larger rooms or hallways where single-point control is inconvenient for daily use.
Switch Function: Dimmer
The device adjusts light intensity rather than just turning it on or off. You can create ambient lighting by lowering brightness or provide task lighting by increasing it. This function requires compatible dimmable bulbs to prevent flickering or damage. It offers precise control over the atmosphere in a room, allowing you to tailor lighting levels to specific activities or times of day.
Design and build details
According to the listing, the Leviton SureSlide LED Dimmer Switch measures 1.8 inches wide, 0.82 inches long, and 4.12 inches high. The unit weighs 3.36 ounces. This compact form factor allows it to fit into standard wall boxes without requiring extra space. The ultra-slim design helps keep the switch flush with your wall surface, which reduces the chance of accidental bumps or snags on clothing.
The switch is available in five finish options: Light Almond, Brown, White, Black, and Ivory. You can select the color that best matches your existing wall plates or decor. This variety ensures the device blends seamlessly into different interior styles, from modern minimalist setups to traditional homes. The specific model reviewed comes in Light Almond, which offers a warm, neutral tone.
The physical layout centers on a single sliding control mechanism. This design allows you to adjust brightness levels smoothly rather than in discrete steps. The switch does not include a display screen or additional buttons for settings. All adjustments are made through the slide action. The build focuses on durability and ease of use, prioritizing a clean look and reliable operation over complex features. This simple interface is ideal for users who prefer straightforward lighting control without extra clutter.
Setup and everyday use
Installing the Leviton SureSlide LED Dimmer Switch requires no neutral wire. This specification simplifies the process for older homes that lack a neutral conductor in the switch box. The ultra-slim design measures 0.82 inches in depth. This compact profile ensures the unit fits into standard single-gang wall boxes without needing deeper electrical boxes. You do not need to worry about bulky components crowding the junction box during installation.
Daily operation centers on smooth, reliable lighting control. The dimmer adjusts overhead lights from bright task lighting to a soft ambient glow. You get flicker-free performance with LED bulbs. This feature delivers consistent lighting without the strobing or buzzing that can occur with cheaper dimmers. The SureSlide mechanism allows for precise adjustments to create the perfect atmosphere for any room.
You can customize the dimmer to suit your preferences. The device allows you to fine-tune the minimum and maximum brightness levels. You can also adjust the fade-on rate. These settings let you tailor the lighting behavior to your specific bulbs and room needs. The model supports standard 3-way and 4-way wiring setups. You can pair this dimmer with compatible switches to control the same lights from multiple locations. This flexibility makes it suitable for hallways, staircases, or large rooms where access from different points is necessary.
Before You Buy This Dimmer
You need to verify your existing wiring before installation. This switch works without a neutral wire, which suits older homes. However, you must check if your box is standard size. The slim profile fits most, but deep boxes may need extra care. You should also confirm your total bulb wattage stays under 150 watts. This applies to LED, halogen, or incandescent types. Mixing high-wattage bulbs can overload the device. If you want multi-location control, you will need compatible three-way or four-way switches. These are sold separately. Keep in mind that this is a local control device. It does not connect to Wi-Fi or your home network. You cannot adjust it from your phone or voice assistant. It fits well in homes that prefer physical switches over smart hubs. It offers reliable manual dimming without requiring an app. You get smooth light adjustment for tasks or ambiance. Just ensure your fixtures match the load limits for safe operation.
Check before you buy
- Verify no neutral wire is present in the wall box
- Confirm total bulb wattage is under 150 watts
- Check if standard wall box depth is sufficient
- Purchase compatible three-way switches for multi-location control
The product at a glance
Leviton SureSlide LED Dimmer Switch
Best for: Standard LED dimming without smart features
- Wiring Requirement
- No neutral required
- Circuit Type
- Single pole, 3-way, 4-way
- Switch Function
- Dimmer
- Maximum Load
- 150W LED
- Dimensions
- 0.82 × 1.8 × 4.12 inches
- Weight
- 3.36 ounces
View on Amazon: Leviton SureSlide LED Dimmer Switch Affiliate link
The Leviton SureSlide dimmer offers smooth, flicker-free control for 150W of LED, halogen, or incandescent bulbs. It features an ultra-slim design that fits standard wall boxes without needing a neutral wire. You can customize minimum and maximum brightness levels and adjust the fade-on rate. It supports 3-way and 4-way wiring setups for multi-location control. This switch is ideal for creating specific lighting atmospheres in residential spaces.
Pros
- Supports 150W LED, halogen, and incandescent loads
- No neutral wire required for installation
- Customizable minimum and maximum brightness settings
- Compatible with 3-way and 4-way wiring
Cons
- Limited to 150W maximum load capacity
- Requires manual adjustment for brightness levels
- No smart home integration or remote control
Good fit if
- You need a simple, reliable dimmer for LED bulbs
- You want to customize brightness fade rates
- You are installing in a standard wall box without a neutral wire
Skip if
- You require voice control or app integration
- You need to dim more than 150W of bulbs
- You prefer a smart switch with remote operation
Verdict: Leviton SureSlide LED Dimmer Switch provides reliable manual control for standard LED fixtures. It suits users who value customizable brightness settings and easy installation without a neutral wire.
Specifications side by side
| Spec | Leviton SureSlide LED Dimmer Switch |
|---|---|
| Wiring Requirement | No neutral required |
| Circuit Type | Single pole, 3-way, 4-way |
| Switch Function | Dimmer |
| Maximum Load | 150W LED |
| Dimensions | 0.82 × 1.8 × 4.12 inches |
| Weight | 3.36 ounces |
| Size | 1.80"L x 0.82"W x 4.12"H (Pack of 1) |
| Color | Light Almond |
| Model | R08-66741-00T |
Frequently asked questions
Does the Leviton SureSlide LED Dimmer Switch require a neutral wire for installation?
No, this dimmer does not require a neutral wire. It is designed to work with standard single-pole wiring configurations. This feature makes it suitable for older homes where neutral wires are often absent in switch boxes. You can install it in most standard wall boxes without additional wiring modifications.
What is the maximum LED load capacity for this dimmer?
The Leviton SureSlide LED Dimmer Switch supports up to 150 watts of LED loads. You must ensure the total wattage of all connected bulbs does not exceed this limit. Exceeding the 150-watt threshold can cause the device to malfunction or overheat. Always check the wattage rating of each bulb before installation.
Is the Leviton SureSlide dimmer compatible with incandescent bulbs?
Yes, the device is compatible with incandescent bulbs. It handles up to 150 watts of incandescent loads, matching its LED and halogen capacity. You can use it to control standard incandescent fixtures alongside or instead of LED bulbs. The single-pole design allows for control from one location.
What color options are available for the Leviton SureSlide dimmer?
The model R08-66741-00T is available in Light Almond. This color is designed to blend with warm-toned wall plates and decor. You can verify the specific color finish on the product packaging or listing. Other color variants may exist for different models within the SureSlide line.
How deep is the Leviton SureSlide dimmer switch body?
The switch body has a depth of 0.82 inches. This ultra-slim profile allows it to fit into standard electrical boxes without crowding. You do not need to replace existing boxes unless they are unusually deep. The compact size ensures a clean fit behind standard wall plates.
Can I control the Leviton SureSlide dimmer from multiple locations?
No, this is a single-pole dimmer switch. It is designed to control lights from one location only. You cannot wire it for 3-way or 4-way configurations. If you need multi-location control, you would need to purchase additional compatible switches or a different type of dimmer.