Enbrighten Toggle Add-On Switch Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This enbrighten z wave add on switch review focuses on a device designed to extend control rather than operate alone. It is a white toggle switch that requires a primary smart controller to function. The two specs that define it are its Z-Wave connectivity and its role as an add-on unit. You can link up to four of these switches to a main dimmer or switch. This setup allows you to control lights from multiple locations. The design prioritizes installation ease and space efficiency in standard electrical boxes.
What stands out
- QuickFit design reduces housing depth by up to 20% for tighter boxes
- Dual offset ground ports enable simple daisy chaining in multi-switch setups
- Supports universal 120/277VAC use for both home and light-commercial applications
- Links with one main smart control to operate from up to five locations
Who it fits
Good fit for
You should choose this switch if you already own a Z-Wave smart dimmer or switch and need to add control points in your home. It is ideal for older homes with shallow electrical boxes because the reduced depth fits where standard switches might not. The dual ground ports make wiring easier when you have multiple switches on one wall. It also suits commercial spaces due to the 277VAC rating. If you need to control lights from several spots without running new wires, this add-on solves that problem efficiently.
Who should skip it
Skip this product if you do not already have a compatible Z-Wave, Wi-Fi, or Zigbee smart control. This switch cannot operate independently; it must be linked to a primary device. If you want a standalone smart switch that works without a hub or main controller, look elsewhere. It is also not suitable if you need a dimming feature built into this specific unit, as it is a toggle add-on only. You must purchase a separate main switch to make this system function.
Verdict: This add-on switch is a practical solution for expanding control in existing Z-Wave systems. It fits well in tight spaces and simplifies multi-location wiring.
Key specs for this add-on
Connectivity: Z-Wave
This device uses the Z-Wave wireless protocol to communicate with your home automation hub. You need a compatible Z-Wave controller to pair it. This standard offers reliable mesh networking, allowing signals to hop between devices. It ensures stable control even in larger homes. Compare this to Wi-Fi or Zigbee options if your hub supports different protocols. Z-Wave is ideal for users who already have a Z-Wave ecosystem in place.
Switch Function: Add-On Switch
This is not a standalone smart switch. It cannot control lights on its own. You must install it alongside a primary smart switch or dimmer. This add-on unit extends control to additional locations within the same circuit. It allows you to operate the main switch from multiple points. This is useful for hallways or large rooms where one switch is insufficient. It relies entirely on the primary device for power and logic.
Circuit Type: Multi-switch, up to 5 locations
You can link up to four add-on switches to one primary smart switch. This allows control from five distinct locations. Each add-on unit mirrors the state of the main switch. This setup is perfect for staircases or long corridors. You do not need separate wiring for each location. This reduces installation complexity compared to traditional multi-way switching. Check your existing wiring to ensure it supports this multi-location configuration.
Size: 1.75 inches wide
The housing width is 1.75 inches. This compact footprint helps fit into tight electrical boxes. Older homes often have shallow boxes with limited space. The reduced depth prevents components from crowding behind the wall plate. This makes installation easier in crowded junction boxes. Compare this to bulkier smart switches that may not fit. Ensure your electrical box depth can accommodate the internal components safely.
Model: 59340
This specific model number identifies the exact hardware variant. Use this number when searching for replacement parts or technical documentation. It ensures you buy the correct toggle style and connectivity type. Different model numbers may have different voltage ratings or features. Keep this number handy for customer support or warranty claims. It distinguishes this white Z-Wave add-on from other Enbrighten products.
Physical design and build quality
According to the listing, this Enbrighten switch uses QuickFit technology to reduce housing depth by up to twenty percent. This compact design eliminates heat tabs, which helps prevent overheating in tight spaces. The unit measures 1.75 inches wide, 4.25 inches tall, and 1.75 inches deep. Its white finish matches standard wall plates. The small footprint makes it suitable for older-style switch boxes or multigang configurations where space is limited. You will find it easier to fit into crowded electrical boxes compared to bulkier models.
The layout includes dual ground ports that are offset to avoid mounting screws. This feature allows for daisy-chaining in multi-switch setups. The switch supports multi-switch operation across up to five locations. It requires a primary smart controller to function, so it is not a stand-alone device. You can link it with as many as four add-on switches. The toggle mechanism provides manual control when needed. The device is rated for universal 120/277VAC use. This means it works in common home installations and light-commercial applications. The build focuses on reliability and ease of installation. You get a practical solution for extending control without adding bulk to your walls.
Setup and everyday use details
You cannot install this switch as a standalone device. It requires a primary smart controller to function. The listing specifies that it must be paired with a Wi-Fi, Z-Wave, or Zigbee smart switch or dimmer. Once linked, you can operate the light from up to five different locations. You can connect as many as four add-on switches to a single control unit. This setup allows for flexible placement in hallways or stairwells.
Installation is designed for tight spaces. The housing depth is reduced by up to twenty percent compared to previous models. This compact size makes it suitable for older-style switch boxes or multigang configurations where space is limited. The unit eliminates the need for heat tabs, which improves reliability in confined areas. Wiring is simplified by dual ground ports. These ports are offset to avoid mounting screws, allowing for easy daisy-chaining in multi-switch setups.
Daily use involves toggling the switch to control the connected light. The device supports universal voltage ratings. It works with standard 120VAC home systems and 277VAC light-commercial applications. This flexibility means you can use it in various residential or light-commercial settings. The white toggle faceplate blends with standard wall decor. You rely on the primary smart controller for automation features. The add-on switch simply mirrors the state of the main device. This ensures consistent operation across all linked locations without requiring separate programming for each unit.
Before you buy this add-on
This device is an add-on switch, not a standalone controller. You must already own a primary smart switch or dimmer that supports Z-Wave, Wi-Fi, or Zigbee. The listing states it links to one main control and up to four additional add-on switches. You can operate the circuit from up to five locations. Check your existing hub for Z-Wave compatibility before purchasing. The compact housing fits older or tight switch boxes. It supports both 120VAC and 277VAC circuits. This voltage flexibility allows use in standard homes or light-commercial settings. You do not need to replace your existing smart controller. Instead, you expand its reach. The unit requires no separate app for basic toggling. It relies on your primary hub for automation rules. Ensure your electrical box has sufficient depth for the QuickFit design. The dual ground ports simplify wiring in multi-switch setups. This product extends your current system rather than replacing it. It fits well if you need more toggle points without adding new hubs.
Check before you buy
- Confirm you have a primary smart switch or dimmer.
- Verify your hub supports Z-Wave connectivity.
- Check switch box depth for the compact housing.
- Ensure your circuit voltage matches 120VAC or 277VAC.
The product at a glance
Enbrighten Toggle Add-On Switch
Best for: expanding Z-Wave switch locations in tight boxes
- Circuit Type
- 3-Way
- Switch Function
- Add-On Switch
- Connectivity
- Z-Wave
- Dimensions
- 1.75 × 1.75 × 4.25 inches
View on Amazon: Enbrighten Toggle Add-On Switch Affiliate link
This Enbrighten add-on switch expands control to up to five locations using Z-Wave connectivity. It requires a primary smart switch or dimmer to function. The QuickFit design reduces housing depth by 20%, making it suitable for tight electrical boxes. It supports 120/277VAC voltage and features SimpleWire for easy daisy-chaining. You need a compatible hub to automate this device.
Pros
- Supports multi-switch operation at up to 5 locations
- QuickFit design reduces housing depth by 20%
- SimpleWire dual ground ports allow daisy-chaining
- Rated for universal 120/277VAC use
Cons
- Cannot operate as a stand-alone switch
- Requires a separate Wi-Fi, Z-Wave, or Zigbee smart control
- Limited to Z-Wave connectivity only
Good fit if
- You need to add toggle control from multiple locations
- You have limited space in older electrical boxes
- You already use a Z-Wave smart home hub
Skip if
- You want a standalone switch without a hub
- You prefer Wi-Fi or Zigbee connectivity
- You need a dimmer function
Verdict: Enbrighten Z-Wave Add-On Toggle Switch is a practical solution for adding control points to existing Z-Wave circuits. It fits users who need flexible multi-location switching in tight spaces.
Specifications side by side
| Spec | Enbrighten Toggle Add-On Switch |
|---|---|
| Circuit Type | 3-Way |
| Switch Function | Add-On Switch |
| Connectivity | Z-Wave |
| Dimensions | 1.75 × 1.75 × 4.25 inches |
| Size | 1 Pack |
| Color | White |
| Model | 59340 |
Frequently asked questions
Can this switch work without a hub?
No, it requires a primary smart controller to function. You must pair it with a compatible Wi-Fi, Z-Wave, or Zigbee smart switch or dimmer. It operates as an add-on, meaning it extends control rather than acting as the main device. Without that primary link, it cannot send or receive signals independently.
What is the physical size of the unit?
The unit measures 1.75 inches wide, 4.25 inches tall, and 1.75 inches deep. It comes in a one-pack size. This compact form factor helps it fit into tight electrical boxes. The design reduces housing depth to save space behind the wall, making installation easier in crowded junctions.
Does it support Z-Wave mesh networking?
Yes, it uses Z-Wave connectivity to communicate with your home automation hub. This standard offers reliable mesh networking, allowing signals to hop between devices. It ensures stable communication across your network. You need a compatible Z-Wave controller to pair it and enable this robust wireless protocol.
How many add-on switches can one hub control?
The listing states it links to one main control and up to four additional devices. This allows you to expand control points from a single primary switch. You can place these add-ons in multiple locations. This setup is ideal for multi-way switching in hallways or large rooms.
Is it compatible with dimmers?
Yes, the listing specifies it links to a smart switch or dimmer. You can pair it with a compatible dimmer to extend control over lighting levels. This allows you to adjust brightness from multiple locations. Ensure your primary device supports the required protocol for full functionality.
What color options are available?
This model comes in white. It is designed to blend with standard wall plates and decor. The finish matches typical residential electrical hardware. You can install it alongside other white fixtures for a uniform look. No other colors are listed in the current product data.
Does it have QuickFit technology?
Yes, it uses QuickFit technology to reduce housing depth by up to twenty percent. This compact design eliminates heat tabs, which helps prevent overheating in tight spaces. The reduced depth makes it easier to fit into crowded electrical boxes. It is a practical solution for existing installations.